JONATHAN Y JYL8014A - User Manual

To Next Page

PIECE DESCRIPTION PICTURE

QUANTITY

PIECE DESCRIPTION PICTURE QUANTITY

A Lamp base 1X E Shade 1X

B Saddle 1X F Finial 1X

C Socket 1X G Bulb 1X

D Harp 1X

Model# JYL8014A

Product Dimensions: 6"L X 6"W X 12"H

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced;

If the cord is damaged, the luminaire shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an

extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.

Part List and Hardware List

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

Need help?

Do you have a question about the JONATHAN Y JYL8014A and is the answer not in the manual?

Summary

Safety and Installation Warnings

Electrical Installation and Inspection

Recommends licensed electrician installation, switching off power before installation, and inspecting for damage.

Important Safety Instructions

Covers checking parts, assembling on soft surfaces, cord safety, polarized plug use, and extension cord guidelines.

Product Components and Assembly

Part List and Hardware

Details all pieces, descriptions, pictures, and quantities for lamp assembly.

Preparation and Assembly Steps

Guides on checking parts, assembly sequence, bulb insertion, and final stability check.

Summary

Safety and Installation Warnings

Electrical Installation and Inspection

Recommends licensed electrician installation, switching off power before installation, and inspecting for damage.

Important Safety Instructions

Covers checking parts, assembling on soft surfaces, cord safety, polarized plug use, and extension cord guidelines.

Product Components and Assembly

Part List and Hardware

Details all pieces, descriptions, pictures, and quantities for lamp assembly.

Preparation and Assembly Steps

Guides on checking parts, assembly sequence, bulb insertion, and final stability check.

This document outlines the assembly, usage, and maintenance of a portable table lamp, emphasizing safety and proper care. The lamp is designed for indoor use and features a classic aesthetic with a lamp base, saddle, socket, harp, shade, finial, and a bulb.

Function Description

The primary function of this device is to provide illumination. It operates as a portable lamp, meaning it can be moved and placed on various surfaces to cast light. The lamp utilizes a standard socket for a bulb, and its design includes a shade to diffuse the light, creating a softer ambiance. The assembly process involves securing the harp into the saddle, placing the shade onto the harp, and then tightening the finial to hold the shade in place. Finally, the bulb is inserted into the socket to complete the setup. Once assembled and plugged into an appropriate electrical outlet, the lamp can be turned on to provide light.

Usage Features

The lamp is designed for straightforward assembly and use. Users are advised to ensure all parts are present and undamaged before beginning assembly. The assembly process is estimated to take approximately 6 minutes, indicating a quick and easy setup.

Key steps for usage include:

Assembly: The harp (D) is inserted into the saddle (B). The shade (E) is then placed onto the harp (D), and the finial (F) is tightened onto the harp (D) to secure the shade.
Bulb Installation: The bulb (G) is screwed into the socket (C).
Placement: After assembly, the lamp should be placed on a level surface to ensure stability.

The lamp is designed to accommodate specific bulb types to ensure safe and efficient operation. It can use an ON/OFF type "B" bulb with a maximum wattage of 25-WATT, a CFL bulb with a maximum wattage of 9-WATT, or an LED bulb with a maximum wattage of 5-WATT. Notably, the product includes an LED 4-WATT bulb in the box, providing an energy-efficient lighting solution from the start.

A significant safety feature of this portable lamp is its polarized plug. This plug has one blade wider than the other, designed to fit into a polarized outlet only one way. This feature is crucial for reducing the risk of electric shock. If the plug does not fit fully into the outlet, the user is instructed to reverse the plug. If it still does not fit, contacting a qualified electrician is recommended. Users are explicitly warned against attempting to defeat this safety feature or using an extension cord unless the plug can be fully inserted into the extension cord.

Maintenance Features

Proper maintenance is essential to ensure the longevity and appearance of the lamp. The manual provides clear guidelines for care and cleaning:

Cleaning Preparation: Before cleaning, the lamp should always be unplugged from the electrical outlet to prevent electrical hazards.
Shade Cleaning: Lamp shades can be dusted using a feather duster or an appropriate vacuum-brush attachment. This helps remove accumulated dust without damaging the shade material.
Base Cleaning: The lamp bases should be cleaned with a soft, dry cloth. The cleaning method for the base should be appropriate to its material to avoid damage.
Chemical Avoidance: Users are strongly advised to avoid the use of chemicals and household cleaners on any part of the lamp. These substances can potentially damage the finish of the lamp, leading to discoloration or deterioration.

Safety Warnings and Recommendations

The document begins with critical warnings and recommendations to ensure user safety and proper installation:

Professional Installation: Installation of this lighting fixture is strongly recommended to be done by a licensed electrician. This ensures that the wiring and connections are handled correctly and safely, minimizing risks.
Power Disconnection: Before any installation or maintenance, users must switch off the main electrical supply from the main fuse box/circuit breaker. This is a fundamental safety precaution to prevent electric shock.
Pre-Installation Inspection: It is crucial to inspect the item carefully before attempting to install it. If there is any damage or obvious defect, the product should not be installed. The manual explicitly states that the item may not be returned once it has been installed, underscoring the importance of this pre-installation check.
Assembly Surface: During assembly, the item should be assembled on a soft surface. This prevents scratching the finish of the lamp components.
Risk Reduction: To reduce the risk of fire, electrical shock, or injury to persons or property, users must follow the provided guidelines for safe use and installation.
Cord Integrity: The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed. This highlights the importance of maintaining the cord's integrity and not attempting repairs that could compromise safety.

In summary, this portable table lamp is designed for ease of assembly and use, providing ambient lighting with a focus on safety through its polarized plug and clear maintenance instructions. Adherence to the provided warnings and recommendations is crucial for safe operation and to preserve the lamp's condition.