JONATHAN Y JYL8002B User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE
QUANTITY
A Lamp base 1X E Screw 3X
B Lamp Body 3X F Bulb 1X
C Socket 1X G CUP 1X
D Shade 1X
Model# JYL8002B
Product Dimensions: 15"L X15"W X 71.5"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS

JONATHAN Y JYL8002B Specifications

General

Brand	JONATHAN Y
Model	JYL8002B
Category	Home Lighting
Language	English

Summary

General Safety Warnings

Installation Safety

Recommend installation by a licensed electrician; switch off power before installation.

Inspection Before Installation

Inspect item carefully for damage or defects before installation.

Care and Maintenance

Cleaning Guidelines

Unplug lamps before cleaning. Use feather duster or vacuum brush. Wipe with soft, dry cloth.

Material Care

Clean lamp bases appropriately. Avoid chemicals and household cleaners that may damage finish.

Important Safety Instructions

Assembly Prerequisites

Ensure all parts are present before assembly. Assemble on a soft surface to prevent scratching.

Cord Replacement Restriction

The external flexible cable or cord cannot be replaced; if damaged, the luminaire shall be destroyed.

Polarized Plug Safety

Portable lamp has a polarized plug for shock risk reduction; fits outlet one way. Do not defeat.

Product Preparation and Assembly

Pre-Assembly Check

Verify all parts are present. Compare with package contents list. Do not assemble if parts are missing.

Bulb Type Recommendation

Use Type A bulb max 100W, CFL max 23W, or LED max 12W. An LED 9W bulb is included.

Assembly Steps

Align parts, screw components together carefully, avoiding twisting the power cord.