Step 1 Step2 Step3
Make sure all parts could be aligned before assemble Put the shade(E) on the Socket(D), then Put the light on a level surface to check
Do not rotate lamp body too hard avoid base screw broken tighten the Shade (E) by the Ring (F) if everything is stable.
Screw "S" metal (C) onto the Lamp body (B2) Insert the bulb(G) into the socket(D).
Screw the Lamp body (B2) onto the Lamp body(B1)
Screw the Lamp body (B1) onto the Lamp base(A)
Be careful not to twist the power cord and tighten securely
PLEASE USE ON/OFF TYPE"G" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE IS LED 4-WATT X3PCS BULB IN THE BOX
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
To Previous Page
Loading...
Need help?
General
