EasyManua.ls Logo

JONATHAN Y JYL8011A - User Manual

Default Icon
2 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Shade 3X
B Lamp Body 2X F Ring 3X
C Tree Metal 1X G Bulb 3X
D Socket 3X
Model# JYL8011A
Product Dimensions: 26"L X 11.75"W X 71"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
Question and Answer IconNeed help?

Do you have a question about the JONATHAN Y JYL8011A and is the answer not in the manual?

Summary

General Warnings and Safety

Electrical Safety Precautions

Switch off main electrical supply before installation. Inspect item for damage.

Installation Recommendations

Recommended for installation by a licensed electrician.

Care and Maintenance

Cleaning Instructions

Unplug lamps before cleaning. Use soft cloths and appropriate methods for material.

Chemicals and Cleaners

Avoid chemicals and household cleaners as they may damage the finish.

Important Safety Instructions

Pre-Assembly Checks

Ensure all parts are present and assemble on a soft surface to prevent scratching.

Usage and Installation Guidelines

Follow guidelines to reduce risk of fire, electrical shock, or injury.

Cord and Plug Safety

External cord cannot be replaced. Polarized plug fits one way; do not defeat safety feature.

Part List and Hardware

Product Preparation and Assembly

Assembly Steps

Follow numbered steps for aligning parts, connecting components, and final checks.

Bulb Specifications

Use ON/OFF type G bulb max 40W, CFL max 13W, or LED max 9W.

Summary

General Warnings and Safety

Electrical Safety Precautions

Switch off main electrical supply before installation. Inspect item for damage.

Installation Recommendations

Recommended for installation by a licensed electrician.

Care and Maintenance

Cleaning Instructions

Unplug lamps before cleaning. Use soft cloths and appropriate methods for material.

Chemicals and Cleaners

Avoid chemicals and household cleaners as they may damage the finish.

Important Safety Instructions

Pre-Assembly Checks

Ensure all parts are present and assemble on a soft surface to prevent scratching.

Usage and Installation Guidelines

Follow guidelines to reduce risk of fire, electrical shock, or injury.

Cord and Plug Safety

External cord cannot be replaced. Polarized plug fits one way; do not defeat safety feature.

Part List and Hardware

Product Preparation and Assembly

Assembly Steps

Follow numbered steps for aligning parts, connecting components, and final checks.

Bulb Specifications

Use ON/OFF type G bulb max 40W, CFL max 13W, or LED max 9W.

Overview

  1. Function Description
  2. Usage Features
  3. Maintenance Features

This document outlines the assembly, usage, and maintenance of a floor lamp, emphasizing safety precautions and proper installation procedures.

Function Description

The device is a floor lamp designed to provide illumination in a room. It features multiple light sources, allowing for a broader spread of light. The lamp is intended for indoor use and requires assembly before operation. It utilizes specific bulb types to ensure proper functioning and safety.

Usage Features

  • Assembly: The lamp requires assembly, which should be performed on a soft surface to prevent scratching the finish. The assembly process involves connecting various lamp body sections, attaching the lamp base, and securing the shades and bulbs. Users are advised to ensure all parts are present before beginning assembly and to avoid overtightening or twisting the power cord during the process. The estimated assembly time is 6 minutes.
  • Bulb Compatibility: The lamp is designed to be used with specific bulb types: a "G" bulb with a maximum of 40 watts, a CFL bulb with a maximum of 13 watts, or an LED bulb with a maximum of 9 watts. The product includes three 4-watt LED bulbs.
  • Polarized Plug: For safety, the lamp is equipped with a polarized plug, meaning one blade is wider than the other. This design helps reduce the risk of electric shock by ensuring the plug fits into a polarized outlet only one way. If the plug does not fit fully, users should reverse it. If it still doesn't fit, a qualified electrician should be contacted. The use of an extension cord is only recommended if the plug can be fully inserted into it. Users are explicitly warned against attempting to defeat this safety feature.
  • Installation: Installation should ideally be performed by a licensed electrician. Before any installation or maintenance, the main electrical supply from the fuse box/circuit breaker must be switched off. Users are instructed to carefully inspect the item for any damage or defects before installation. If any damage or defect is found, the item should not be installed, as it cannot be returned once installed.
  • Stability Check: After assembly, the lamp should be placed on a level surface to ensure it is stable before use.

Maintenance Features

  • Cleaning: To clean the lamp, it should first be unplugged from the power source. Shades can be dusted with a feather duster or a vacuum-brush attachment. Lamp bases should be cleaned with a soft, dry cloth using methods appropriate for the material of the base.
  • Chemical Avoidance: Users are advised to avoid using chemicals and household cleaners on the lamp, as these can damage the finish.
  • Cord Integrity: The external flexible cable or cord of the luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed to prevent safety hazards.
  • Regular Inspection: Before attempting to install, the item should be carefully inspected for any damage or obvious defects. If any are found, the item should not be installed. This proactive inspection helps ensure the safety and longevity of the product.
  • Professional Installation Recommendation: While not strictly a maintenance feature, the recommendation for professional installation by a licensed electrician contributes to the overall safety and proper functioning of the lamp, potentially reducing the need for future maintenance due to incorrect setup.
  • Dusting: Regular dusting of the shades with a feather duster or a vacuum-brush attachment helps maintain the lamp's appearance and light output.
  • Base Cleaning: Cleaning the lamp bases with a soft, dry cloth and appropriate methods for the material helps preserve the finish and aesthetic appeal over time.
  • Avoiding Harsh Cleaners: The explicit warning against using chemicals and household cleaners is a key maintenance guideline to prevent damage to the lamp's finish, ensuring its aesthetic integrity for longer.
  • Cord Damage Protocol: The instruction to destroy the luminaire if the cord is damaged is a critical safety protocol, preventing potential electrical hazards that could arise from a compromised power cord.
  • Pre-Installation Inspection: The requirement to inspect the item carefully for damage or defects before installation is a preventative maintenance step, ensuring that only a sound product is put into service, thereby minimizing potential issues down the line.
  • Electrical Safety: The emphasis on switching off the main electrical supply before installation or any maintenance involving electrical components is a fundamental safety practice that protects the user from electrical shock.
  • Extension Cord Caution: The warning regarding extension cords and polarized plugs is a usage and maintenance feature that ensures the electrical connection remains safe and stable, preventing overheating or improper grounding.
  • Preventing Base Screw Damage: The instruction to avoid rotating the lamp body too hard during assembly helps prevent damage to the base screw, which is crucial for the lamp's structural integrity.
  • Power Cord Management: The advice to be careful not to twist the power cord during assembly helps prevent internal damage to the wiring, which could lead to electrical issues or safety hazards over time.
  • Ensuring Stability: The final step of placing the light on a level surface to check for stability is a maintenance check that ensures the lamp will not easily tip over, preventing damage to the lamp or injury to individuals.

JONATHAN Y JYL8011A Specifications

General IconGeneral
BrandJONATHAN Y
ModelJYL8011A
CategoryOutdoor Light
TypeWall Light
MaterialMetal
FinishBlack
Bulb TypeLED
Wattage9 W
Voltage120 V
StyleModern
Number of Bulbs1
Power SourceHardwired
LocationOutdoor
Lumens800
Color Temperature3000K (Warm White)
IP RatingIP65

Related product manuals