JONATHAN Y Modernist JYL3542A

To Next Page

PIECE DESCRIPTION PICTURE

QUANTITY

PIECE DESCRIPTION PICTURE QUANTITY

A machine screw 2X G screwed ball 2X

B mounting screw 2X H glass shade 3X

mounting

bracket

1X I bulb 3X

D ground screw 1X

E wire connector 3X

Model#: JYL3542A

Product Dimensions: 24''WX9.125''H X 7.5"E

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use

and installation

*The external flexible cable or cord of this lamp cannot be replaced

If the cord is damaged, the lamp shall be destroyed

Part List and Hardware List

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe

the surface of the fixture.

To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the

fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the

interior surface of the fixture.

Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

1/2

Need help?

Do you have a question about the JONATHAN Y Modernist JYL3542A and is the answer not in the manual?

Summary

General Warnings and Safety Precautions

Installation Precautions

Emphasizes installation by a licensed electrician and switching off power before work.

Care and Maintenance

Cleaning Guidelines

Instructions for cleaning the fixture's interior and exterior using a damp cloth, avoiding solvents.

Important Safety Instructions

Assembly and Usage Safety

Key points include checking parts, using a soft surface for assembly, and following safety guidelines.

Preparation and Assembly Steps

Mounting Bracket Installation

Securing the mounting bracket to the outlet box using the provided machine screws.

Wire Connections Guide

Instructions for making wire connections between the fixture and the power supply.

Grounding Instructions

Procedure for grounding the fixture for safe installation in the US and Canada.

Final Assembly

Attaching the back plate, installing bulbs, and securing the glass shade.

This document provides instructions for the installation, use, and maintenance of the JONATHAN Y Model JYL3542A lighting fixture.

Function Description:

The JYL3542A is a lighting fixture designed to be installed on a wall, providing illumination for indoor spaces. It features three light sources, each covered by a glass shade, and is designed for use with specific types of bulbs to ensure optimal performance and safety. The fixture requires connection to a standard electrical outlet box and includes components for secure mounting and electrical wiring.

Important Technical Specifications:

Model Number: JYL3542A
Product Dimensions: 24" W x 9.125" H x 7.5" E (Extension from wall)
Bulb Type: The fixture is designed to use Type "A" bulbs with a maximum wattage of 40-watt, Edison bulbs with a maximum wattage of 40-watt, CFL bulbs with a maximum wattage of 13-watt, or LED bulbs with a maximum wattage of 9-watt. The package includes three 4-watt LED bulbs.
Electrical Connection: Requires connection to a main electrical supply, with wiring instructions provided for both hot (black/red) and neutral (white) outlet supply wires, including specific guidance for parallel cords and insulated wires. A ground wire connection is also required for safety.
Installation: Designed for permanent installation to an outlet box using a mounting bracket and screws.

Usage Features:

Assembly: The estimated assembly time is 20 minutes. Users are advised to ensure all parts are present before starting and to assemble the item on a soft surface to prevent scratching.
Bulb Installation: Bulbs (I) are installed into the lamp holders (J). It is crucial to use bulbs within the specified wattage limits. Electrical current must be turned off before changing bulbs.
Shade Installation: Glass shades (H) are placed over the lamp holders (J) and secured by metal clips (K).
Safety Instructions:
- Installation should be performed by a licensed electrician.
- The main electrical supply must be switched off at the fuse box/circuit breaker before installation.
- The item should be inspected for damage or defects before installation; damaged items should not be installed or returned.
- Adherence to grounding instructions is critical for safety, with specific steps for installations in the United States and Canada.
- The external flexible cable or cord of this lamp cannot be replaced. If the cord is damaged, the lamp must be destroyed to prevent electrical hazards.
- Always ensure electrical current is turned off when performing maintenance or changing bulbs.

Maintenance Features:

Cleaning the Outside: Use a dry or slightly dampened clean cloth (with clean water, never a solvent) to wipe the surface of the fixture.
Cleaning the Inside: First, disconnect power to the fixture by turning off the circuit breaker or removing the fuse. Then, use a dry or slightly dampened clean cloth (with clean water, never a solvent) to wipe the interior surface.
Prohibited Cleaners: Do not use any cleaners with chemical solvents or harsh abrasives. Only a dry soft cloth should be used for dusting or careful wiping.