JONATHAN Y Nala User Manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IF THERE IS ANY DAMAGE OR
1/2
INSPECT
ITEM
CAREFULLY
BEFORE
ATTEMPTING
TO
INSTALL
.
IF
THERE
IS
ANY
DAMAGE
OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL5002A-SET2
Product Dimensions: 11"L X 11"W X 27.75"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wi
p
e with a soft, dr
y
cloth and clean lam
p
bases with the methods a
pp
ro
p
riate to
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
vacuum brush
attachment.
Wipe
with
a
soft,
dry
cloth
and
clean
lamp
bases
with
the
methods
appropriate
to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
* Please make sure that you have all parts indicated before you begin assembly of this item
*
This item should be assembled on a soft surface to prevent scratching the finish during assembly
This
item
should
be
assembled
on
a
soft
surface
to
prevent
scratching
the
finish
during
assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
D
Harp
1X
D
H
arp
1X
1/2

JONATHAN Y Nala Specifications

General

Brand	JONATHAN Y
Model	Nala
Category	Outdoor Light
Language	English

Summary

General Safety Warnings

Electrical Safety

Switch off main electrical supply before installation. Inspect for damage before installation. Do not install if damaged.

Installation Precautions

Recommend installation by a licensed electrician. Do not install if item is damaged or defective.

Polarized Plug Safety

Lamp has a polarized plug for shock risk reduction. Ensure it fits the outlet; contact electrician if needed.

Care and Maintenance

Cleaning Instructions

Unplug lamps before cleaning. Dust shades with feather duster/vacuum. Wipe bases with soft, dry cloth.

Chemical Avoidance

Avoid using chemicals and household cleaners, as they may damage the finish.

Assembly Preparation and Parts

Pre-Assembly Checks

Ensure all parts are present before assembly. Assemble on a soft surface to prevent scratching.

Part Identification

Lists components: Lamp base, Saddle, Socket, Harp, Shade, Finial, and Bulb.

Assembly Instructions

Step 1: Shade Assembly

Insert Harp into Saddle, place Shade on Harp, and tighten Finial onto Harp.

Step 2: Bulb Installation

Insert the bulb into the socket.

Step 3: Stability Check

Place the lamp on a level surface to ensure it is stable.