12
1. To prevent affecting the working performance of the machine, it is recommended to regularly clean and
maintain the machine body, floor brush, dirt suction port, and wastewater tank;
2. Before cleaning, stop the machine and clean the machine body with a cloth dipping in water or neutral
detergent; please wring out the cloth to avoid water stains penetrating the inside of the machine;
3. Wastewater tank cleaning: Please clean the wastewater tank timely every time after use, and clean the upper
cover and filter of the wastewater tank regularly.
Remove the upper cover Remove the filter, wash with clean water, and dry
4. Clean the water jet port on the roller brush cover and the roller brush.
▶ Users can clean the water spray port on the roller brush cover regularly according to the use conditions to avoid
accumulation and scaling of stains to affect water flow.
▶ Remove the roller brush regularly for cleaning and drying to avoid long-term micro-wetness of roller brush
resulting in odor.
Remove the upper cover of lower
roller brush in the arrow direction
Wash the upper cover of roller
brush
Disassemble the roller brush in the
arrow direction
1
Remove the end cover of
roller brush in the arrow
direction, and remove debris
②. Remove hairs from the surface
of roller brush with scissors
Wash it with clean water, and dry it
Install the robber brush in the arrow
direction
Insert the latch of upper coper of
roller brush into the hole in the
arrow direction
Press the upper cover of roller brush
in the arrow direction until a “click”
sound is heard, so the installation is
completed
To Next Page
Loading...
