JONR ED10 - Abnormal Condition Indicators; Light Warnings and Solutions

14
Maintenance and Service
7. Description of abnormal conditions of lights
Abnormal conditions
Light warning
Solution
Short circuit
The red light flashes 5 times
Contact the customer service center and sent it
to the factory for repair
The wastewater tank is full
The red light flashes 4 times
Pour wastewater water
The charging temperature is
abnormal
The red light flashes 3 times
Charge after being placed quietly at room
temperature
The adapter voltage is abnormal
The red light flashes 3 times
Use the original charger or sent it to the factory
for repair
The battery is dead
The red light flashes 3 times
Contact the customer service center and sent it
to the factory for repair
The motor current is abnormal
The red light flashes 5 times
Power off the machine and dry
The floor brush is blocked
The red light flashes 5 times
Remove impurities from the roller brush
The battery is overheating
The red light flashes 8 times
Power off the machine and leave it idle for 30
minutes
The battery is damaged
The red light flashes 12
times
Contact the customer service center and sent it
to the factory for repair
The battery is exhausted
The red light flashes 5 times
Charging base