2
IDENTIFICATION (WHAT IS WHAT?)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1718
19
20
21
22
23
25
24
1. Cylinder Cover
2. Front Handle
3. Front Handle Guard
4. Starter Cover
5. Chain Oil Tank
6. Starter Handle
7. Carburetor Adjusting Screw
8. Choke Control / Throttle Lock
9. Rear Handle
10. ON/OFF Stop Switch
11. Fuel Tank
12. Muffler
13. Bar Tip Sprocket
14. Saw Chain
15. Saw Bar
16. Bumper Spike
17. Chain Catcher
18. Clutch Cover
19. Rear Hand Guard
20. Throttle Control
21. Throttle Lock
22. Bar/Chain Adjustment Tool
23. Chain Tensioning Screw
24. Operator ’s Manual
25. Guide Bar Cover
26. Primer Bulb
26
*
16
IDENTIFICATION OF SYMBOLS
WARNING!
This chain saw can be dangerous! Careless or improper use
can cause serious or even fatal injury.
Read and understand the instruction manual before using the chain saw.
Always use two hands when operating the chain saw .
WARNING!
Contacting the guide bar tip with any object
should be avoided; tip contact may cause the guide bar to
move suddenly upward and backward, which may cause se-
rious injury.
Always wear ear protection.
To Next Page
Loading...