13
TECHNICAL DATA SHEET
Engine
Cylinder volume, cm
3
36
Stroke, mm 32
Idle speed, rpm 3,000
Recommended max.
speed, unloaded, rpm 13,000
Power, kW 1,57
Ignition system
Manufacturer Walbro
Type of ignition system CD
Spark plug C hampion
Electrode gap, mm 0,5
Fuel and lubrication system
Manufacturer Walbro
Carburetor type WT 391
Fuel capacity, litre 0,38
Oil pump capacity at
8500 rpm, ml/min 4 -- 8
Oil capacity, litre 0,29
Type of oil pump Automatic
Weight
Without bar and chain, kg 4,7
BAR CHAIN
Length Pitch Max
Inches Inches Tip Radius
14 0.375 7T Oregon 91VJ
16 0.375 7T Oregon 91VJ
Noise levels
Equivalent (see note 1) noise
pressure level at operator ’s ear ,
measured according to relevant
international standards, dB(A) 90,6
Equivalent (see note 1) noise
power level, measured
according to relevant
international standards, dB(A) 114
Vibration levels
(see note 2)
Front handle, m/s
2
4,18
Rear handle, m/s
2
6,84
Chain/bar
Standard bar length, in/cm 14/36 16/41
Recommended bar lengths,
in/cm 14/36 16/41
Usable cutting length, in/cm 13,5/35 15,5/40
Chain speed at maximum
power, m/sec 18,5 18,5
Pitch, inches 0,375 0,375
Thickness of drive link, mm 1,27 1,27
No. of teeth on drive sprocket 6 6
Note 1:
Equivalent noise level is, according
to ISO 7182 and ISO 9207, calculated as the
time--weighted energy total for noise levels
under various working conditions with the fol-
lowing time distribution, 1/2 idle, 1/3 full load,
1/3 full speed.
Note 2:
Equivalent vibration level is, accord-
ing to ISO 7505, calculated as the time--
weighted energy total for vibration levels un-
der various working conditions with the fol-
lowing time distribution: 1/3 idle, 1/3 full load,
1/3 full speed.
2035
2035
0,375 85! 30! 0!
14/36:52
16/41:56
0,050/1.3 5/32 / 4.0 0,025/0,65
91VJ
in/cm :dl
YEAR OF CONSTRUCTION:
2002
MANUFACTURER’S ADDRESS:
Jonsered
SE--561 82 Huskvarna
Huskvarna, Sweden