Jonsered 2149 User Manual

2 – English
KEY TO SYMBOLS
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
This product is fitted with a catalytic
converter
If your saw bears this decal it is equipped
with carburettor heating.
Symbols
CAUTION! Chain saws can be dangerous!
Careless or incorrect use can result in
serious or fatal injury to the operator or
others.
Switch off the engine by moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Protective glasses or a visor must be worn.
Refuelling
Chain oil and chain oil flow adjustment
This product is in accordance with
applicable EC directives.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective glasses or visor
Please read the instructions carefully and
make sure you understand them before
using the saw.
Noise emission to the environment
according to the European Community’s
Directive.
The machine’s emission is specified in
chapter Technical data and on label.

Jonsered 2149 Specifications

General

Engine displacement	49.4 cm³
Weight	5.1 kg
Bar length	40 cm (16 in)
Fuel tank volume	0.5 liters
Chain gauge	0.050"
Power output	2.4 kW
Chain pitch	0.325 inches