12
English
Motor (16)
The one-man sawmill is driven by an air-cooled,
two-stroke motor of the type previously and also
currently used in our larger chain saws. The
motor is equipped with a centrifugal coupling,
which causes the saw blade to stop when the
motor is idling.
Whenever sawing is in progress, the motor
should be run at full capacity (with the throttle
fully open).
The carburetor of the motor is adjustable for
operation either under normal weather conditions
or under cold weather conditions, see under
"Winter operation" on page 33.
Tanks (8, 15)
The saw carriage is equipped with two tanks.
The fuel tank (15) is located beneath the right-
hand steering handle
The cleaning liquid tank (8) is located on the
right-hand side of the saw carriage and supplies
cleaning liquid to the saw blade everytime the
brake handle is activated.
DESCRIPTION
15
8
Exhaust system (9)
The exhaust gases from the motor are
discharged away from the operator through the
exhaust pipe and muffler.
To Next Page
Loading...