Need help?Do you have a question about the Jonsered BC 2125 and is the answer not in the manual?
Key safety warnings and advice before starting the machine.
Information on engine certification and specific hazard warnings.
Explains the value of the operator's manual for product longevity and value.
Covers general machine operation warnings and requirements.
Details essential protective gear required for safe operation.
Guidance on appropriate clothing and having a first aid kit.
Instructions for checking safety features like throttle lockout and stop switch.
Importance and inspection of guards for cutting attachments.
Explanation of the vibration damping system and its benefits.
Details on the quick release system for emergency situations.
Role of the muffler and basic maintenance checks.
Additional safety notes and maintenance for the muffler.
Correct procedure for fitting and tightening the locking nut.
General guidelines for using cutting attachments and sharpening.
Specific instructions for sharpening grass cutting tools.
Detailed instructions for sharpening saw blades.
Guidelines and tips for using trimmer heads effectively.
Step-by-step guide to assembling the handlebar and throttle controls.
How to adjust the handlebar for transport and storage.
Instructions for safely attaching cutting implements to the shaft.
Procedure for installing blade guards and grass-related cutting attachments.
Procedure for installing blade guards and saw blades.
Procedure for installing trimmer guards and trimmer heads.
Instructions for attaching various guards and other cutting tools.
How to properly adjust the harness and balance the machine.
Essential safety measures when handling fuel.
Guidelines for safe transport and storage of fuel and the equipment.
Information on correct gasoline types and oil mixing ratios.
Step-by-step instructions for correctly mixing fuel and oil.
Safe methods and precautions for refueling the machine.
A checklist of items to inspect before attempting to start the engine.
Detailed procedure for starting the engine using the starter cord.
How to use the throttle lockout and start throttle button.
Method for safely shutting off the engine using the stop switch.
Covers general safe working practices and area preparation.
Fundamental safety rules for operating the machine in various conditions.
Techniques for felling trees and clearing wood using a saw blade.
Methods for cutting brush and small stems with a saw blade.
Techniques for clearing coarse grass using a grass blade.
Methods for trimming grass in hard-to-reach areas.
Using the trimmer head's fan effect for efficient clearing.
Explanation of carburetor controls and initial factory settings.
Procedures for fine-tuning the carburetor for optimal performance.
Adjusting the engine's idle speed using the T-screw.
Adjusting the high-speed fuel jet (H-jet) for engine performance.
Adjusting the engine speed for starting.
Maintenance and safety checks for the muffler system.
Cleaning and maintaining the engine's cooling system.
Checking and maintaining the grease level in the bevel gear.
Procedures for cleaning and oiling the air filter.
Inspection, cleaning, and replacement of the spark plug.
Outlines owner responsibilities and warranty coverage details.
Specifies which parts and failures are covered or excluded by the warranty.
Information on how to obtain warranty service and file claims.
To Next Page
General
