Need help?Do you have a question about the Jonsered BC2145 and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Power Output | 2.1 kW |
| Cutting Width | 45 cm |
| Fuel Tank Capacity | 0.9 L |
| Shaft Type | Straight |
| Starter System | Recoil starter |
Explains the meaning of various symbols used in the manual for safe operation.
Welcomes the user and introduces the operator's manual for the Jonsered product.
Identifies and labels the parts of the BC 2145 clearing saw using diagrams.
Identifies and labels the parts of the FC series clearing saws using diagrams.
Provides crucial general safety guidelines and warnings for machine operation.
Details essential protective gear required for safe operation.
Explains checks and maintenance for safety features like throttle lock and stop switch.
Details the function and safety checks for throttle lock and stop switch.
Covers safety of cutting guards, vibration damping systems, and mufflers.
Explains the quick release feature for emergency situations.
Covers safety related to locking nuts and general cutting equipment.
Provides guidance on sharpening and using cutting attachments safely.
Offers safety advice and techniques for trimmer heads.
Guides on assembling the handlebar and throttle controls for different models.
Details how to adjust the handlebar for transport and storage.
Instructions for fitting cutting attachments, guards, blades, and heads.
Guides on fitting trimmer guards and specific trimmer heads.
Instructions for fitting alternative guards and cutting attachments.
Details adjusting the harness for fit, balance, and quick release.
Explains how to achieve correct balance and cutting height with the harness.
Covers safe practices for handling, transporting, and storing fuel.
Specifies recommended gasoline types and octane ratings for the engine.
Explains the correct fuel-oil mixture and safe fueling practices.
Outlines essential checks before starting the machine for safety.
Details starting procedures for both cold and warm engines.
Provides detailed starting steps and critical safety warnings.
Explains the function and operation of heated handles.
Outlines the procedure for stopping the engine safely.
Offers fundamental advice and safety rules for operating the machine.
Lists fundamental safety rules for safe machine operation.
Details techniques for felling trees and clearing wood with a saw blade.
Explains techniques for cutting grass using a grass blade.
Details methods for cutting brush and thin stems with a saw blade.
Provides guidance on trimming grass with a trimmer head.
Explains techniques for clearing vegetation and cutting grass with a trimmer head.
Describes using the trimmer head for quick clean-up and sweeping.
Explains carburetor operation and basic/fine adjustment procedures.
Details the role of L, H, and T jets in carburetor adjustment.
Guides on adjusting the idle speed (T screw) for correct operation.
Explains the high speed jet (H) adjustment for engine power and performance.
Covers setting procedures for load and no-load conditions.
Details adjusting the start throttle speed for the BC 2145 model.
Covers muffler checks, cleaning, and safety warnings, especially catalytic converters.
Explains the importance and cleaning of the cooling system.
Covers cleaning, oiling, and replacing the air filter for engine health.
Details lubrication requirements for the bevel gear and drive shaft.
Explains how to check, clean, and replace the spark plug.
Provides instructions for adapting the machine for cold and snowy conditions.
Lists recommended maintenance tasks and their frequency for daily, weekly, and monthly checks.
Outlines the owner's responsibilities and warranty coverage.
Details the scope and duration of the manufacturer's warranty.
Lists specific parts covered under the emission control warranty.
Emphasizes the owner's responsibility for required maintenance.
To Next Page
