Need help?Do you have a question about the Jonsered Bc 2145 and is the answer not in the manual?
General| Brand | Jonsered |
|---|---|
| Model | Bc 2145 |
| Category | Brush Cutter |
| Language | English |
Explains various safety and operational symbols used on the machine.
Welcomes the customer and highlights the importance of the operator's manual.
Identifies the parts of the BC 2145 clearing saw with a diagram.
Identifies the parts of the FC 2145 and FC 2145 S clearing saws with diagrams.
Details required protective gear like helmet, eye protection, gloves, boots, clothing, and first aid kit.
Explains the purpose and checks for the machine's safety features.
How the throttle lock prevents accidental operation and its checks.
How to use the stop switch to safely turn off the engine.
Details the purpose and checks for the cutting attachment guard.
Explains the vibration damping system and its maintenance.
Describes the muffler's function, maintenance, and safety warnings.
Instructions for tightening and checking the locking screw.
Instructions for checking and tightening the locking nut.
How to choose and maintain cutting equipment for safety and performance.
Instructions for sharpening grass cutters and blades correctly.
Guide on correctly sharpening a saw blade for efficiency and safety.
Instructions for using and maintaining the trimmer head and cord.
Steps for assembling the handlebar and throttle for the BC 2145 model.
Steps for assembling the handlebar and throttle for FC 2145/S models.
How to adjust the handlebar for transport and storage.
Instructions for fitting the blade guard, grass blade, and support cup.
Instructions for fitting the blade guard and saw blade.
Steps for fitting the trimmer guard and Trimmy SII trimmer head.
Instructions for fitting various guards and cutting attachments.
How to adjust the standard harness for optimal balance and safety.
How to adjust the vector harness for optimal balance and safety.
Proper use of harnesses for balance and safety during operation.
Important precautions for handling fuel safely, including spillages and leaks.
Guidelines for safely storing and transporting fuel.
Details on petrol requirements, two-stroke oil types, and mixing ratios.
Step-by-step instructions for mixing petrol and oil for the engine.
Safety guidelines to follow when refuelling the machine.
Essential checks to perform before starting the machine for safety.
Detailed steps for starting a cold engine, including choke and primer use.
Steps for starting a warm engine without using the choke.
Proper technique for pulling the starter cord to start the engine.
How to safely stop the engine using the stop switch.
Basic safety precautions and rules for working with clearing saws and trimmers.
Key safety rules to follow during operation, including looking around and weather.
General advice on clearing techniques, equipment use, and work organization.
General advice on terrain, slopes, clearing patterns, and cutting stems.
Techniques and safety for clearing using a saw blade, avoiding kickback.
Technique for cutting thin stems and brush with a sawing movement.
Technique for clearing tall or coarse grass using a grass blade.
How to use the trimmer head for trimming, clearing, and cutting grass.
Using the trimmer cord's fan effect for easy clearing and sweeping.
Explains the function of the carburettor and its control elements.
Details basic and fine adjustment procedures for the carburettor.
Adjusting the high speed jet (H) for optimal engine power and temperature.
How to adjust the start throttle speed for proper engine acceleration.
Procedures for cleaning and checking the muffler, including spark arrestor mesh.
How to keep the cooling system clean for optimal engine temperature.
Instructions for cleaning and maintaining the air filter to prevent malfunctions.
Procedures for oiling the air filter to ensure proper filtration.
How to check, clean, adjust, and replace the spark plug.
Procedures for lubricating the bevel gear and drive shaft.
Special measures required for operating the machine in cold conditions.
Modifying air filter for cold temperatures to prevent icing.
A schedule detailing daily, weekly, and monthly maintenance tasks for the machine.
Details on cylinder displacement, bore, stroke, and idle speed.
Information on ignition system type, spark plug, and carburettor type.
Specifications for fuel tank capacity and machine weight.
Measured sound power levels and equivalent noise pressure levels.
Measured vibration levels at handles for different operating speeds.
List of approved cutting attachments and guards with part numbers.
Statement of compliance with European directives for machinery, EMC, and noise.
To Next Page
