Jonsered CC2245 User Manual (English)

Alexandra WolfeAug 6, 2025

Why does my Jonsered Trimmer engine not start?

J
Jacob LunaAug 6, 2025
Several factors can prevent your Jonsered Trimmer engine from starting. It could be due to the stop switch being in the stop position, which requires an approved servicing dealer to replace the stop switch. Other potential causes include the starter pawls not moving freely (clean around the starter pawls), incorrect fuel type (drain and refill with the correct fuel), incorrect idle speed adjustment (adjust the idle speed with the idle speed screw T), a dirty or wet spark plug (dry and clean the spark plug), incorrect spark plug electrode gap (clean the spark plug, ensure correct electrode gap, and use a spark plug with a suppressor), a loose spark plug (tighten the spark plug), or a clogged fuel filter (replace the fuel filter).

Brand	Jonsered
Model	CC2245
Category	Brush Cutter
Language	English

Brand

Jonsered

Model

CC2245

GENERAL SAFETY PRECAUTIONS

Important Safety Information

Key safety warnings and operational guidance for safe machine use.

Personal Protective Equipment (PPE)

Details on essential safety gear including helmet, hearing, eye, and gloves.

Machine Safety Features and Operation

Information on machine safety, throttle lockout, clothing, and first aid.

Operational Safety Controls and Guards

Guidance on stop switch, cutting guards, vibration damping, and quick release.

Vibration Damping System

Details on the vibration damping system and its importance.

Muffler and Locking Nut Safety

Safety considerations for the muffler and proper use of the locking nut.

Cutting Equipment Selection and Use

Proper selection, use, and maintenance of cutting attachments.

Blade Sharpening Procedures

Instructions for sharpening saw blades and grass cutters correctly.

Trimmer Head Guidelines

Guidance on selecting and using trimmer heads and cords.

ASSEMBLY

Handlebar and Throttle Assembly

Step-by-step instructions for attaching the handlebar and throttle components.

Transport Position and Guard Fitting

Adjusting the handlebar for transport and fitting the blade guard assembly.

Blade Guard and Saw Blade Installation

Instructions for attaching a saw blade guard and blade to the drive disc.

Trimmer and Other Cutting Attachment Fitting

Steps for fitting trimmer guards, heads, and other cutting attachments.

Harness Adjustment and Types

Guidance on adjusting standard and vector harnesses for proper fit and use.

Harness Balancing and Height Adjustment

Adjusting harness straps and suspension hook for balance and correct working height.

FUEL HANDLING

Fuel Safety and Storage

Precautions for safe handling, transport, and storage of fuel.

Fuel Types and Mixing Ratio

Information on petrol types, two-stroke oil, and correct fuel/oil mixing ratios.

Fuel Mixing and Refueling Procedures

Detailed steps for mixing fuel and safely refueling the machine.

STARTING AND STOPPING

Pre-Start Checks and General Procedure

Essential checks before starting and the general starting/stopping process.

Engine Starting Procedures

Specific steps for starting cold and warm engines, including throttle settings.

Starting Techniques and Special Features

Detailed starting methods, including decompression valve and heated handles.

WORKING TECHNIQUES

General Working Instructions and Safety

Basic safety rules and general instructions for operating the machine effectively.

Clearing Fundamentals

Key principles for clearing work, including planning and stance.

Forestry Clearing with Saw Blade

Techniques and safety precautions for felling trees using a saw blade.

Brush Cutting with Saw Blade

Methods for cutting brush and dense stems using a saw blade.

Grass Clearing and Trimming Techniques

Instructions for clearing grass with a blade and trimming with a trimmer head.

MAINTENANCE

Carburettor Adjustment and Function

Details on carburettor function, adjustment, and idle speed settings.

Cooling System and Air Filter Care

Cleaning and maintenance procedures for the cooling system and air filter.

Filter, Gear, Shaft, and Spark Plug Maintenance

Procedures for cleaning filters, lubricating gears, drive shafts, and servicing spark plugs.

Winter Use Preparations

Special measures and modifications for operating the machine in cold and snowy conditions.

Maintenance Schedule Overview

A comprehensive schedule detailing daily, weekly, and monthly maintenance tasks.

TECHNICAL DATA

Engine and Ignition Specifications

Technical details on engine displacement, bore, stroke, speeds, and ignition system.

Fuel, Weight, Noise, and Vibration Data

Specifications for fuel capacity, weight, noise emissions, and vibration levels.

Approved Accessories and Guards

List of approved cutting attachments, guards, and their part numbers.

EC Declaration of Conformity

Formal declaration of compliance with European Union directives and applied standards.

Jonsered CC2245 User Manual

Table of Contents

Questions and Answers:

Jonsered CC2245 Specifications

Summary

KEY TO SYMBOLS

INTRODUCTION

WHAT IS WHAT?