Jonsered CC2245 - Approved Accessories and Guards

34 – English
TECHNICAL DATA
FC 2245, FC 2245W
Approved accessories Type Cutting attachment guard, Art. no.
Centre hole in blades/cutters, Ø 25,4
mm
Output shaft thread M12
Grass blade/grass cutter
Multi 255-3 (Ø 255 3 teeth) 537 29 74-02
Multi 275-4 (Ø 275 4 teeth) 537 29 74-02
Multi 300-3 (Ø 300 3 teeth) 537 29 74-02
Saw blade
Scarlet 200-22 (Ø 200 22 teeth) 537 21 71-01
Scarlet 225-24 (Ø 225 24 teeth) 502 03 94-06
Plastic blades
Polytrim Ø 300 mm (Separate blades
have part number 531 01 77-15)
537 29 74-02
Trimmer head
Trimmy S II (Ø 2.4 - 3.3 mm cord) 537 29 73-02
Auto 55 (Ø 2.7 - 3.3 mm cord) 537 29 73-02
Tap-N-Go 45 Spin (Ø 2.7 - 3.3 mm
cord)
537 29 73-02
Support cup
Fixed
With ball bearing
CC 2245
Approved accessories Type Cutting attachment guard, Art. no.
Centre hole in blades/cutters, Ø 25,4
mm
Output shaft thread M12
Grass blade/grass cutter
Multi 255-3 (Ø 255 3 teeth) 537 28 85-02
Multi 275-4 (Ø 275 4 teeth) 537 28 85-02
Multi 300-3 (Ø 300 3 teeth) 537 28 85-02
Saw blade Scarlet 200-22 (Ø 200 22 teeth) 537 31 09-01
Plastic blades
Polytrim Ø 300 mm (Separate blades
have part number 531 01 77-15)
537 28 85-02
Trimmer head
Trimmy S II (Ø 2.4 - 3.3 mm cord) 503 95 43-04
Auto 55 (Ø 2.7 - 3.3 mm cord) 503 95 43-04
Tap-N-Go 45 Spin (Ø 2.7 - 3.3 mm
cord)
503 95 43-04
Support cup
Fixed
With ball bearing