Need help?Do you have a question about the Jonsered CC 2145 and is the answer not in the manual?
General| Brand | Jonsered |
|---|---|
| Model | CC 2145 |
| Category | Brush Cutter |
| Language | English |
Emphasizes careful reading of the manual for understanding instructions before use.
Warns about hearing impairment from noise and the need for hearing protection.
Warns against modifying the machine or using non-authorized accessories.
Warns of the dangerous nature of the machine if used incorrectly.
Warns about chemicals in engine exhaust known to cause harm.
General safety guidelines for operating the machine, including limitations and maintenance.
Explains the purpose and checks for the machine's safety features.
Details the purpose and importance of the cutting attachment guard for operator safety.
Discusses choosing and maintaining cutting equipment for safety and performance.
Details essential personal protective equipment required for safe operation.
Step-by-step instructions for assembling the handlebar and throttle for BC/CC models.
General precautions and steps for assembling cutting equipment.
Step-by-step instructions for assembling the handlebar and throttle for FC series models.
Guidance on adjusting the harness for safe and secure operation of the clearing saw.
Important safety precautions regarding fuel handling, including spills and leaks.
Step-by-step instructions for mixing gasoline and two-stroke oil correctly.
Precautions and steps for safely fueling the machine to minimize fire risk.
Information about fuel requirements, mixture ratios, and warnings.
A checklist of pre-operation checks to ensure safety and proper function.
How to set the start throttle for various models, including decompression valve use.
Detailed steps on how to start the engine safely, including cord pulling technique.
Specific steps for starting the engine when it is cold, including choke and primer.
Basic safety precautions and advice for working with clearing saws and trimmers.
Techniques and safety advice for felling trees with a saw blade.
Essential safety rules to follow while working with the machine.
Information about the carburetor, its function, and the importance of proper adjustment.
How to adjust the idle speed screw (T) to ensure the cutting attachment does not rotate at idle.
A comprehensive schedule of daily, weekly, and monthly maintenance tasks.
Details on adjusting the carburetor based on environmental and emissions legislation.
The effect of the high-speed jet (H) on engine power, speed, and temperature.
Importance of cleaning the air filter and its impact on engine performance.
Steps for fine-tuning the carburetor after the engine has been run-in.
Factors affecting spark plug condition and how to check/replace it.
To Next Page
