Jonsered CS 2171 WH - TECHNICAL DATA; Motor and Fuel System Specifications; Chain and Bar Specifications

38 – English
TECHNICAL DATA
Technical data
CS 2165 CS 2171 CS 2171WH
Motor
Cylinder displacement, cu.in/cm
3
3,97/65,1 4,31/70,7 4,31/70,7
Cylinder bore, inch/mm 1,89/48 1,97/50 1,97/50
Stroke, inch/mm 1,42/36 1,42/36 1,42/36
Idle speed, rpm 2700 2700 2700
Power, kW/hp @ rpm 3,4/4,6 @ 9300 3,9/5,3 @ 9600 3,9/5,3 @ 9600
Ignition system
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y
NGK BPMR 7A/
Champion RCJ 7Y
NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5 0,02/0,5
Fuel and lubrication system
Fuel tank capacity, US pint/litre 1,63/0,77 1,63/0,77 1,63/0,77
Oil pump capacity at 9,000 rpm, ml/min 4-21 4-21 4-21
Oil tank capacity, US pint/litre 0,89/0,42 0,89/0,42 0,89/0,42
Type of oil pump Automatic Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, lb/kg 13,2/6,0 13,4/6,1 13,8/6,3
Chain/bar
Standard bar length, inch/cm 15”/38 15”/38 15”/38
Recommended bar lengths, inch/cm 15-28”/38-70 15-28”/38-70 15-28”/38-70
Usable cutting length, inches/cm 14-27"/35-69 14-27"/35-69 14-27"/35-69
Pitch, inch/mm 3/8" /9,52 3/8" /9,52 3/8" /9,52
Thickness of drive links, inch/mm 0,058/1,5 0,058/1,5 0,058/1,5
Drive sprocket type/teeth Rim/7 Rim/7 Rim/7
Chain speed at max. power, m/sec 20,1 21,4 21,4