Need help?Do you have a question about the Jonsered CS2255 and is the answer not in the manual?
General| Cylinder Displacement | 55.5 cm³ |
|---|---|
| Chain Pitch | 3/8" |
| Recommended Bar Length | 13-20 in |
| Chain Gauge | 0.05" |
| Vibration Level (front/rear handle) | 3.5/4.1 m/s² |
Explains symbols displayed on the chainsaw itself for identification.
Explains symbols used within the manual to guide the user.
A welcoming message from the manufacturer to the customer.
A detailed diagram and list identifying all components of the chain saw.
Essential checks and reading material required before operating a new chain saw.
Emphasizes using common sense and wearing appropriate Personal Protective Equipment.
Guidance on inspecting the machine's safety features like chain brake and guards.
Details the function of the chain brake and front hand guard for safety.
Explains the function of the chain brake and methods to prevent dangerous kickback.
Details the throttle lockout mechanism and the function of the chain catcher.
Discusses vibration damping, muffler safety, and spark arrestor mesh.
Provides rules for choosing and maintaining cutting equipment for safety.
Instructions on maintaining chain tension, lubrication, and understanding bar/chain terms.
Defines terms related to the bar and chain for proper use and identification.
Guides on how to sharpen the chain's cutting teeth correctly using files.
Explains how to set the depth gauge for optimal cutting performance.
Further details on tensioning the chain and lubricating cutting equipment properly.
Guidance on filling chain oil, checking lubrication, and maintaining drive sprockets.
Maintenance for the chain drive sprocket and needle bearing lubrication.
How to inspect the chain and bar for wear and damage.
Step-by-step instructions for attaching the bar and chain to the saw.
Procedures for fitting the bar and chain using the tool-less tensioner.
Information on how to install a spike bumper, referring to service agent.
Information on fuel types, mixing ratios, and oil types for the engine.
Guidance on selecting and using two-stroke and chain oils correctly.
Safe procedures for refueling the machine and handling fuel.
Best practices for transporting and storing the chain saw.
Detailed steps for starting the engine in both cold and warm conditions.
Instructions for idling the engine and safely stopping the machine.
Essential checks to perform before starting any work with the chainsaw.
Basic safety rules and advice for operating the chainsaw effectively.
Important rules for safe operation and understanding kickback.
Guides on performing basic cuts safely.
Techniques for limbing branches and cutting logs safely.
Guidance on safe tree felling practices and maintaining safe distances.
How to determine and control the felling direction and prepare a retreat path.
Steps involved in making directional and felling cuts for controlled tree felling.
Procedures for safely releasing trapped trees and cutting tensioned branches.
Specific advice on preventing kickback when performing limbing operations.
Overview of maintenance tasks and detailed carburetor adjustment.
Inspecting safety equipment like the chain brake and front hand guard.
Adjusting the high-speed jet and verifying correct carburetor function.
Testing the inertia brake release and throttle lockout for proper function.
Verifying the condition of chain catcher, guards, damping system, and muffler.
Instructions for checking and cleaning the muffler and spark arrestor mesh.
Steps for replacing the starter cord and tensioning the recoil spring.
Guidance on cleaning and replacing the air filter for optimal engine performance.
Checking spark plugs and lubricating the bar tip sprocket.
Adjusting the oil pump and understanding the cooling system.
Details on the cooling system and the "Turbo Air Cleaning" function.
Special measures for operating the chainsaw in cold and snowy conditions.
A schedule outlining routine maintenance tasks by frequency.
Specifications for the engine, fuel system, noise, and vibration levels.
Details on chain/bar dimensions and chain filing requirements.
Lists approved bar and chain combinations for the model.
Information on saw chain filing angles and required file gauges.
Formal declaration of the product's conformity with EU directives.
To Next Page
