To Next PageTo Next PageHow to fix fuel leaking from the Jonsered CS2186 carburettor?
If the carburettor of your Jonsered Chainsaw leaks fuel, it could be due to several reasons. Check for a loose or faulty fuel pipe, a hole in the diaphragm, or a worn needle/needle tip. Also, inspect the control system for sticking or being set too high, and check for leaks (air or fuel). Finally, ensure the cover on the carburettor pump side is not loose.
How to troubleshoot a Jonsered CS2186 Chainsaw that is difficult to start?
If your Jonsered Chainsaw is difficult to start, several factors could be at play. Try these solutions: Adjust the L-screw, check if the air filter is blocked, examine the choke to ensure it's working, and inspect for a worn choke axle or valve. Also, check for a blocked fuel filter or fuel line, a seized piston ring, or a blocked impulse channel.
What to do if Jonsered CS2186 does not accelerate?
If your Jonsered Chainsaw does not accelerate, consider the following potential solutions: Adjust the L-screw and H-screw. Check for a blocked air filter, tank ventilator, fuel filter, or fuel line. Inspect for loose or faulty fuel pipe, a blocked impulse channel, or a loose cover on the carburettor’s pump side. Also, look for a faulty pump diaphragm, leaking intake hose (rubber), or loose carburettor mounting. Other possible causes include a control system set too low or incorrectly fitted, a sticking control system, a faulty diffuser jet, or a blocked muffler.
Why Jonsered CS2186 Chainsaw will not run at full throttle?
If your Jonsered Chainsaw will not run at full throttle, consider these possible solutions: Adjust the H-screw. Check for a blocked air filter, tank ventilator, fuel filter, or fuel line. Look for a loose or faulty fuel pipe or a leaking/blocked impulse channel. Inspect the cover on the carburettor’s pump side for looseness and check for a faulty pump diaphragm or leaking intake hose (rubber). Also, check for loose carburettor mounting, a control system set too low, a damaged or incorrectly fitted control system, a leaking diaphragm/cover plate, or a sticking control system. Finally, inspect for a blocked muffler.
What to do if Jonsered CS2186 does not idle?
If your Jonsered Chainsaw does not idle, try these solutions: Adjust the L-screw. Check for a leaking intake hose (rubber) or loose carburettor mounting, and inspect for a loose or faulty fuel pipe. Also, look for a blocked fuel filter or fuel line, or a blocked tank ventilator. Other potential issues include a stiff throttle valve axle, a throttle wire that sticks, a defective throttle return spring, a bent valve axle stop, or a faulty diffuser jet.
Why Jonsered CS2186 has low power?
If your Jonsered Chainsaw has low power, consider the following: Adjust the H-screw, check for a blocked tank ventilator or fuel filter, and inspect for a leaking or blocked impulse channel. Also, check if the cover on the carburettor’s pump side is loose or if the pump diaphragm is faulty. A blocked air filter, a sticking control system, a leaking control system (air or fuel), an incorrectly assembled control system, a loose diaphragm, a hole in the diaphragm, or a leaking diaphragm/cover plate could also be the cause.
What to do if Jonsered CS2186 engine stops when throttle released?
If the engine of your Jonsered Chainsaw stops when the throttle is released, try these solutions: Adjust the L-screw and H-screw. Also, check for a faulty pump diaphragm, a control system set too high, a sticking control system, or a faulty diffuser jet.
How to troubleshoot too rich idling on Jonsered CS2186 Chainsaw?
If your Jonsered Chainsaw has too rich idling, consider the following solutions: Adjust the L-screw. Check for a worn needle/needle tip, a control system set too high, or a worn lever arm in the control system. Also, inspect for a leaking diaphragm/cover plate or a sticking control system.
What to do if Jonsered CS2186 Chainsaw floods when engine is not running?
If your Jonsered Chainsaw floods when the engine is not running, check for a worn needle/needle tip, a control system set too high, or a sticking control system.
How to fix too rich acceleration on Jonsered CS2186 Chainsaw?
If your Jonsered Chainsaw experiences too rich acceleration, consider the following: Adjust the L-screw and H-screw. Also, check for a blocked air filter, a faulty pump diaphragm, or a faulty diffuser jet.
Explains visual symbols indicating warnings and safety requirements for machine operation.
A welcoming message to the customer from the manufacturer.
Identifies and labels the various parts of the chain saw for user familiarization.
Essential checks and procedures to follow before operating the chain saw for the first time.
Key safety guidelines and advice for general operation and maintenance of the chain saw.
Emphasizes the importance of exercising caution and judgment in all operating situations.
Details mandatory protective gear required for safe operation to prevent injuries.
Explains the function of built-in safety features and their importance for safe operation.
Describes the chain brake mechanism and the front hand guard's role in safety.
Explains the function of the throttle lockout to prevent accidental acceleration.
Guides on selecting and maintaining cutting equipment for optimal performance and safety.
Basic guidelines for using cutting equipment safely and effectively.
Provides instructions on maintaining the chain's cutting edge and depth for safe and efficient operation.
Instructions on how to properly tension the saw chain to prevent jumping off or excessive wear.
Explains the critical importance of proper chain and bar lubrication for safety and equipment life.
Daily checks for wear and damage on the chain, bar, and drive sprocket.
Step-by-step instructions for correctly assembling the guide bar and chain onto the saw.
Information on recommended fuel types, octane ratings, and mixing ratios for the two-stroke engine.
Specifies the correct gasoline to two-stroke oil ratio for optimal engine performance.
Safety precautions and procedures for refueling the chain saw.
Critical safety rules to follow during fueling and when starting the machine.
Essential checks and warnings before starting the engine.
Detailed steps for starting the chain saw when the engine is cold.
Procedures for safely pulling the starter cord and initiating engine ignition.
Method for safely shutting down the engine using the stop switch.
Pre-operation checks to ensure the chain saw is safe and ready for use.
Core safety advice and operational guidelines for various cutting tasks.
General advice for safe chain saw operation, including grip and posture.
Explains fundamental techniques for cutting wood safely and effectively.
Techniques for safely removing branches from a felled tree.
Safe methods for cutting logs, considering support and tension to prevent kickback or jamming.
Comprehensive guide to felling trees safely, including planning and execution.
Factors influencing the decision and execution of the tree's felling direction.
Detailed steps for felling a tree, including making directional and felling cuts.
Crucial information on understanding and preventing hazardous kickback incidents.
Defines kickback and explains the specific conditions that cause it.
Instructions for adjusting the carburetor for optimal engine performance and emissions control.
Procedures for inspecting and maintaining all safety features of the chain saw.
How to adjust the oil pump for optimal chain lubrication based on bar length.
Special measures and considerations for operating the chain saw in cold weather conditions.
A comprehensive schedule outlining daily, weekly, and monthly maintenance tasks.
Specifications for the engine, fuel system, weight, and chain/bar components.
Lists compatible bar and chain combinations that meet Canadian safety standards.
Specific recommendations for bar and chain combinations, including pitch and gauge.
Outlines the owner's responsibilities and rights concerning the emission control system warranty.
Details the duration and scope of the manufacturer's warranty for emission-related parts.
General safety guidelines for users operating chain saws according to American standards.
Detailed information on identifying and preventing dangerous kickback incidents.
Additional safety measures, including one-handed operation, fatigue, and environmental considerations.
General
