Need help?Do you have a question about the Jonsered CS2141 and is the answer not in the manual?
General| Engine displacement | 40.9 cm³ |
|---|---|
| Power output | 1.8 kW |
| Fuel tank volume | 0.4 l |
| Oil tank volume | 0.2 l |
| Chain pitch | 3/8" |
| Bar length | 35 cm |
| Chain gauge | 1.3 mm |
| Vibration level | 4.5 m/s² |
Details symbols found directly on the chain saw for safe operation and identification.
Provides essential checks and preparations before operating a newly acquired or used chain saw.
Lists crucial general safety guidelines and warnings for chain saw operation and user conduct.
Details essential protective gear required for safe chain saw operation, protecting against injuries.
Explains the function and importance of the chain saw's built-in safety features for operator protection.
Describes the operation and function of the chain brake and front hand guard for safety.
Explains how the chain brake is activated manually and automatically during use.
Details how the inertia release mechanism activates the chain brake during kickback events.
Outlines how to select and maintain cutting equipment for optimal performance and safety.
Emphasizes the importance of proper chain tension and lubrication for safety and wear.
Discusses features in cutting equipment that help reduce the risk and effects of kickback.
Provides instructions and warnings on how to properly sharpen the cutting teeth of the chain.
Step-by-step guide on how to adjust the depth gauge setting for optimal cutting.
Instructions on how to properly tension the saw chain to prevent jumping off or excessive wear.
Details the importance and methods for lubricating the chain and bar for safe operation.
Step-by-step instructions for correctly fitting the guide bar and saw chain to the machine.
Specifies the type of gasoline and oil mixture required for the two-stroke engine.
Provides guidelines and ratios for safely mixing gasoline and two-stroke engine oil.
Details critical safety measures to prevent fires and explosions during refueling.
Lists essential safety practices to follow when handling fuel and refueling the machine.
Lists essential safety notes and checks to perform before starting the chain saw.
Step-by-step guide for starting the chain saw when the engine is cold.
Instructions for starting the chain saw when the engine is already warm.
Lists essential checks to perform on the chain saw before starting work.
Provides fundamental safety rules and advice for using a chain saw effectively.
Emphasizes the importance of a clear work area and stable footing for safe operation.
Advises on how to safely cut trees that are under tension, preventing spring-back.
Explains the causes of kickback and how to reduce the risk through proper grip and technique.
General rules for safe cutting, including grip, speed, and avoiding overhead cuts.
Explains cutting with the top edge of the bar (pushing chain) and associated kickback risks.
Details cutting with the bottom edge of the bar (pulling chain) for better control.
Provides guidance on how to safely limb branches from a felled tree.
Emphasizes that tree felling requires experience and caution, advising against it for inexperienced users.
Explains the phenomenon of kickback and provides techniques to avoid it.
A detailed schedule listing daily, weekly, and monthly maintenance tasks for the machine.
Specific safety measures to prevent kickback accidents and injuries.
To Next Page
