Jonsered CS2186 - INTRODUCTION; Dear customer!; WHAT IS WHAT?; What is what on the chain saw?

Canadian – 3
CONTENTS
Contents
KEY TO SYMBOLS
Symbols on the machine: .............................................. 2
Symbols in the operator’s manual: ................................ 2
CONTENTS
Contents ....................................................................... 3
INTR ODUCTION
Dear customer! ............................................................. 4
WHA T IS WHAT?
What is what on the chain sa w? ................................... 5
GENERAL SAFETY PRECA UTIONS
Bef ore using a new chain saw ...................................... 6
Important ....................................................................... 6
Always use common sense .......................................... 6
Personal protective equipment ...................................... 7
Machine ′ s safety equipment ......................................... 7
Cutting equipment ......................................................... 10
ASSEMBL Y
Fitting the bar and chain ............................................... 16
FUEL HANDLING
Fuel ............................................................................... 17
ST ARTING AND STOPPING
Star ting and stopping .................................................... 19
W ORKING TECHNIQUES
Bef ore use: .................................................................... 21
General working instructions ........................................ 21
How to avoid kickback ................................................... 28
MAINTENANCE
Carb uretor adjustment .................................................. 29
Checking, maintaining and servicing chain saw safety
equipment ..................................................................... 30
Muffler ........................................................................... 32
Starter ........................................................................... 32
Air filter .......................................................................... 33
Spark plug ..................................................................... 33
Lubricating the bar tip sprocket ..................................... 34
Needle bearing lubrication ............................................ 34
Adjustment of the oil pump ........................................... 34
Cooling system ............................................................. 34
Centrifugal cleaning “Turbo” .......................................... 34
Winter use ..................................................................... 35
Heated handles ............................................................. 35
Maintenance schedule .................................................. 36
TECHNICAL D ATA
T echnical data ............................................................... 37
Saw chain filing and file gauges .................................... 38
FEDERAL EMISSION CONTR OL WARRANTY
STATEMENT
Y OUR WARRANTY RIGHTS AND OBLIGATIONS ...... 39
AMERICAN ST ANDARD SAFETY PRECAUTIONS
Saf ety precautions for chain saw users ........................ 40