To Next PageTo Next Page
Need help?Do you have a question about the Jonsered HT2218 and is the answer not in the manual?
General| Engine Displacement | 21.7 cm³ |
|---|---|
| Power Output | 0.6 kW |
| Blade Length | 45 cm |
| Weight | 5.2 kg |
| Engine Type | 2-stroke |
| Displacement | 21.7 cm³ |
Description of common symbols used in the manual.
Explains the symbol for the locking lever and handle adjustment.
Explains symbols relating to special market certifications.
Details the symbol for engine stop switch operation.
Explains the symbol indicating the need for gloves.
Explains the symbol for regular cleaning.
Explains the symbol for visual inspection.
Explains the symbol for protective goggles or visor.
Explains the symbol for choke control.
Explains the symbol for air purge.
Explains the symbol for noise emission.
Explains the symbol for starting procedures.
Congratulates the customer on their Jonsered product.
Stresses the manual's value for product longevity and resale.
Notes Jonsered's policy of continuous improvement.
Lists and identifies all numbered parts of the machine.
Covers general safe operation and maintenance.
Warns about potential interference with medical implants.
Warns about hazards of running engine in confined spaces.
Warns about risks involving children and the machine.
Warns about risks associated with faulty blades.
General advice on using PPE.
Guidance on using hearing protection.
Guidance on using eye protection.
Advice on wearing gloves.
Advice on wearing suitable boots.
Advice on appropriate work clothing.
Importance of having a first aid kit available.
Overview of safety features and checks.
Explanation and checks for the throttle lockout mechanism.
Instructions for using and checking the stop switch.
Instructions for checking the hand guard.
Explanation of the vibration damping features.
Safety advice regarding the muffler and its function.
Advice on cleaning spark arrestor mesh.
Hazards associated with hot catalytic converters.
Caution regarding chemicals in mufflers.
Warning about hot exhaust fumes and fire risk.
Instructions for checking the blade guard.
Precautions to take when handling fuel.
Guidelines for safely storing and transporting fuel/machine.
Recommended types of petrol for the machine.
Recommendations for two-stroke engine oil.
Guidance on correct fuel-oil mixture ratios.
Step-by-step instructions for mixing fuel and oil.
Hazards associated with hot catalytic converters.
Safety measures to prevent fire during refueling.
Essential checks before operating the machine.
General steps for starting the engine.
Specific steps for starting a cold engine.
How to use the primer bulb during starting.
Detailed instructions for pulling the starter cord.
How to adjust the choke after the engine starts.
Warnings about improper starter cord use.
Procedure for starting a warm engine.
How to shut off the engine using the stop switch.
Basic safety for hedge trimmer operation.
Precautions regarding the work environment.
Advice on maintaining a stable stance.
Warning against leaving the running machine unattended.
Importance of holding the machine with both hands.
Procedure for clearing jammed blades.
Method for loosening stuck blades.
Tips for efficient trimming.
Precautions after finishing operation.
How to adjust the rear handle on the HT2223T model.
How to adjust the idle speed of the carburettor.
Guidance on checking and maintaining the muffler.
Hazards of hot catalytic converters.
Description and maintenance of the cooling system.
Factors affecting spark plug condition and maintenance.
Procedure for cleaning the air filter.
Procedure for oiling the air filter.
Instructions for lubricating the gear housing.
Ensuring correct installation of cutting unit screws.
How to clean and lubricate the blades and blade bars.
Maintenance tasks to perform before each use.
Maintenance tasks after 40 hours of operation.
Maintenance tasks after 100 hours of operation.
Details about the engine displacement, bore, stroke, etc.
Information on spark plug type and gap.
Fuel tank capacity.
Machine weight without fuel.
Sound power levels (measured and guaranteed).
Sound pressure levels at operator's ear.
Vibration levels at the handles.
Type, length, and speed of the blades.
Husqvarna AB declares conformity with EU directives.
Lists relevant EU directives for machinery, EMC, and noise.
Lists standards used for conformity assessment.
Details of voluntary type examination by SMP Svensk Maskinprovning AB.
Information about the development manager.
