Need help?Do you have a question about the Jonsered HT 2124 and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Power Output | 0.75 kW |
| Cutting Width | 24 cm |
| Weight | 4.5 kg |
| Fuel tank volume | 0.5 L |
| Fuel Tank Capacity | 0.5 L |
| Shaft Type | Straight |
| Handle Type | Loop handle |
| Engine Displacement | 24.5 cm³ |
| Displacement | 21.7 cm³ |
Explains warning, operational, and safety symbols used in the manual.
Identifies and illustrates the various parts of the hedge trimmer.
Provides crucial general safety information and warnings for using the machine.
Details essential personal protective equipment (PPE) required for safe operation.
Describes the safety features of the machine and how to check them.
Explains the function and checks for the throttle lockout safety mechanism.
Details the operation and checks for the engine stop switch.
Explains the purpose and checks for the hand guard safety feature.
Describes the vibration damping system and its maintenance checks.
Explains the muffler's function, safety warnings, and maintenance.
Covers blade adjustment, maintenance, and replacement.
Explains the blade guard's purpose and checks for damage.
Warns about the hot gear housing and how to avoid burns.
Provides essential safety precautions for handling fuel.
Details fuel types, oil requirements, and correct mixing ratios for the engine.
Outlines safe practices for transporting and storing the machine and fuel.
Gives step-by-step instructions for safe refueling.
Lists essential pre-start checks for safe operation.
Explains the procedures for starting and stopping the engine.
Offers fundamental advice and safety precautions for working with the trimmer.
Details safety practices to follow during operation.
Outlines precautions related to the work environment and bystanders.
Provides essential safety steps after finishing work.
Describes effective methods for trimming hedges.
Discusses carburetor function, adjustment, and idle speed settings.
Covers muffler maintenance, spark arrestor screens, and catalytic converters.
Explains the cooling system and how to clean it.
Details spark plug maintenance, gap setting, and replacement.
Covers air filter cleaning, replacement, and oiling procedures.
Instructs on gear housing lubrication and maintenance.
Covers cleaning the blades and lubricating the blade bars.
Provides a detailed schedule for daily, weekly, and monthly maintenance tasks.
Lists specifications for engine, ignition, fuel, weight, sound, vibration, and blades.
Outlines the owner's rights and responsibilities regarding the emissions warranty.
Details the duration and scope of the manufacturer's warranty.
Specifies the owner's duties for maintaining warranty coverage.
To Next Page
