MAINTENANCE
18 – English
Cutting unit
Check that the cutting units' screws are fitted correctly.
Tighten them with a tightening torque of 7-10 Nm.
Cleaning and lubrication
Clean any resin and plant residue from the blades using
cleaning agent 531 00 80-04 (SMÖRJA) before and after
using the machine.
Check that the blade edges are not damaged or
def
ormed. File away any burrs.
Check that the blades move freely. Remove the
lubrication plug in the gear housing and stick in the
combination spanner and turn back and forth.
Lubricate the blade bars with special grease, part no. 531
00 80-05 (SMÖRJ
A EXTRA) before long periods of
storage.
IMPORTANT! Use only JONSERED replacement parts.
Use of other brands of replacement parts can cause
damage to your unit or injury to the operator or others.
Your warranty does not cover damage or liability caused
by the use of accessories and/or attachments not
specifically recommended by JONSERED.
To Next Page
Loading...
