To Next PageTo Next Page
Need help?Do you have a question about the Jonsered Z48F and is the answer not in the manual?
General| Engine manufacturer | Briggs & Stratton |
|---|---|
| Cylinders | 2 |
| Fuel type | Gasoline |
| Engine lubrication type | Full pressure |
| Oil filter | Yes |
| Transmission type | Hydrostatic |
| Transmission manufacturer | Hydro-Gear |
| Cutting width | 122 cm |
| Deck type | Fabricated |
| Cutting height, min | 1.5 in |
| Cutting height, max | 4 in |
| Cutting height adjustment | Manual |
| Cutting height steps | 6 |
| Blades | 3 |
| Nose roller | Yes |
| Seat back height | High |
| Armrests | No |
| Hour meter type | Digital with pre-programmed service intervals |
| Service interval indicator | Yes |
| Cup holder | Yes |
| Weight | 770 lbs |
| Base machine, length | 75 in |
| Tire size, rear | 20x10-8 |
| Cylinder displacement | 724 cm³ |
| Blade engagement | Electric |
| Seat type | High-back |
Guidance on transporting the machine on public roads.
Instructions and precautions for towing the machine.
Guidelines for operating the machine safely and effectively.
Information on dealer support and spare parts availability.
Crucial safety directives to prevent injury or death.
Guidelines to ensure children's safety around the mower.
Safe operating practices and operator responsibilities.
Recommended personal protective equipment (PPE) for safe operation.
Precautions and techniques for safe operation on slopes.
Procedures for safely refueling and handling gasoline.
General maintenance checks and safety considerations.
Safety guidelines for transporting the mower.
Safety instructions for towing equipment with the mower.
Information regarding the spark arrestor system.
Description of how to operate the steering and speed controls.
Operation and importance of the park brake system.
Adjusting engine speed and blade rotation with the throttle.
Using the choke for cold engine starts.
Engaging and disengaging the mower deck blades.
Starting and stopping the engine using the ignition switch.
Understanding the service meter for maintenance reminders.
Adjusting the operator's seat for comfort and safety.
Location and function of the primary fuse.
Adjusting the mower deck cutting height.
Operating the fuel shut off valve.
Adjusting the mower for straight-line tracking.
Information on the fuel tank capacity and refueling precautions.
Engaging bypass linkages for manual movement.
Guidance for new operators to become familiar with the mower.
Detailed explanation of steering controls and maneuvers.
Pre-operation checks and conditions before starting the engine.
Step-by-step guide to starting the mower's engine.
Procedures for operating the mower after starting.
Steps for safely shutting down the mower's engine.
Specific safety and operational advice for mowing on slopes.
Advice for achieving optimal mowing results.
Instructions for manually moving the mower.
Table outlining maintenance tasks and intervals.
Explanation of the mower's safety interlock system.
Checking and testing the park brake functionality.
Information on blade maintenance, sharpening, and replacement.
Recommended tire pressure for optimal performance.
Battery maintenance, charging, and jumper cable usage.
Steps to clean battery terminals for better conductivity.
Guide for safely replacing the mower battery.
Checking and replacing caster wheels.
Adjusting anti-scalp rollers for proper deck height.
Inspection and replacement of V-belts.
Procedure for removing and installing the mower deck belt.
Leveling the mower deck for an even cut.
Cleaning the mower deck and machine components.
Checking for loose or missing hardware.
Table detailing lubrication points and intervals.
General advice and precautions for lubrication.
Information on the maintenance-free transmission.
Procedures for changing the engine oil.
Lubricating wheel bearings and deck spindles.
Lubrication for front wheel mounts and bearings.
Lubricating the mower deck spindles.
Steps for storing the machine during the winter months.
Information on ordering spare parts and annual service.
Procedures and checks performed during machine delivery.
Maintenance tasks to be performed after 10 hours of operation.
Routine daily checks and cleaning procedures.
Maintenance tasks for every 25 hours of operation.
Maintenance tasks for every 50 hours of operation.
Maintenance tasks for every 100 hours of operation.
Maintenance tasks for every 300 hours of operation.
Annual maintenance tasks.
