Jonsered Z54XF - Technical Specifications and Data; Engine and Transmission Specs; Frame and Dimension Data

ENGINE
Manufacturer Kohler
Type KT-730
Power
23 hp
1)
Lubrication Pressure with oil lter
Fuel Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%)
Fuel tank capacity 5 gallons 18.9 litres
Cooling Air cooled
Air lter Heavy duty canister
Alternator 12v 15 amp @ 3600 rpm
Starter Electric
TRANSMISSION
Transmission Hydro-Gear ZT3100
Steering control Dual levers, foam gripped
Speed forward 0-8.5 mph 0-13,7 km/h
Speed reverse 0-4.5 mph 0-7.2 km/h
Brakes Mechanical Park Brake
Front caster tires 13 x 6.5-6
Rear tires, turf pneumatic 22 x 10-10
Tire pressure 15 PSI / 103 kPa / 1 bar
FRAME
Cutting Width 54" 137 cm
Cutting Height 1-1/2" - 4-1/2" 3.8 cm - 11.4 cm
Number of Blades 3
Blade Length 18-1/4" 46 cm
Anti-scalp roller 4 adjustable
Nose roller Yes
Sprung Seat Standard
Hinged Arm Rests Yes
Service Meter Digital
Blade Engagement Ogura Clutch
Deck Construction 11 gauge fabricated
Productivity 3.5 acres/h
14,164 m
2
/h
DIMENSIONS
Weight 845 lbs 383 kg
Base Machine Length 81" 210 cm
Base Machine Height 46" 121 cm
Base Machine Width 53-1/2" 136 cm
Overall Width, Chute Up 63-3/4 162 cm
Overall Width, Chute Down 74" 188 cm
Overall Height, ROPS up 73" 183 cm
1)
The power rating as declared
by the engine manufacturer
is the average gross power
output at the specied
RPM of a typical production
engine for the engine
model measured using
SAE Standards for engine
gross power. Refer to the
engine manufacturer engine
specications.
33
TECHNICAL DATA