Need help?Do you have a question about the Jonsered Frontrider FR2216MA 4X4 and is the answer not in the manual?
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Cylinders | 1 |
| Cutting Height Adjustment | Central |
| Transmission Type | Hydrostatic |
| Cutting Height, Min-Max | 25-75 mm (1-3 inches) |
| Cutting Height Range | 25 - 75 mm |
| Uncut Circle | 0 cm (0 inches) |
| Drive | 4x4 |
List of checks and adjustments performed before delivery to the customer.
Specific maintenance task required after the initial 5 hours of operation.
General safety precautions to prevent injury during operation.
Guidelines for safe operation, understanding controls, and user responsibilities.
Specific safety advice for operating the machine on inclined surfaces.
Precautions to ensure children's safety around the operating machine.
Safety measures to be taken before performing maintenance.
Safety guidelines for transporting the machine on vehicles or roads.
Diagram and list identifying all controls on the machine.
Details about the 3-blade Combi-unit and its functions.
Instructions and precautions for refuelling the machine's fuel tank.
Essential checks and preparations before starting the engine.
Step-by-step procedure for starting the machine's engine.
Procedure for emergency starting using jump leads.
Instructions for operating the machine and controlling its movement.
Advice for achieving optimal mowing results and efficiency.
Procedure for safely shutting down the machine's engine.
Schedule outlining routine maintenance tasks and intervals.
Instructions for cleaning the machine after use.
Ensuring the machine's safety interlock systems are functioning correctly.
Adjusting ground pressure for optimal cutting performance.
Procedure to check the cutting unit's alignment for even cutting.
Steps to adjust the cutting unit's parallelism for optimal mowing.
To Next Page