Need help?Do you have a question about the Jonsered FR2216FA and is the answer not in the manual?
General| Brand | Jonsered |
|---|---|
| Model | FR2216FA |
| Category | Lawn Mower |
| Language | English |
Guidance on driving the machine on public roads and transporting it.
Instructions and warnings related to towing the machine.
Defines the intended use of the ride-on mower and precautions.
Information about dealer support and service for Jonsered products.
Details the checks and adjustments performed before delivery to the customer.
Specifies the initial maintenance required after the first 8 hours of operation.
Explains the meaning of various symbols found on the machine and in the manual.
Identifies and labels all the controls and important parts of the machine.
Covers general safety, insurance, operating principles, and essential warnings.
Detailed instructions and warnings for safely operating the machine on slopes.
Safety precautions for children and essential guidelines for safe machine maintenance.
Safety instructions and procedures for securely transporting the machine.
Explanation of how the throttle and choke controls regulate engine speed and starting.
Details on the speed limiter function using two pedals for forward and reverse.
Instructions on how to apply and release the parking brake.
Information on different cutting units and their features, including mulching.
Instructions for adjusting the seat lengthways and tipping it forward.
Guidelines for safely refuelling the machine with correct fuel type and precautions.
Explanation of the release lever's function for moving the machine when the engine is off.
Checks and preparations required before starting the engine, including safety and maintenance checks.
Step-by-step instructions for starting the engine, with considerations for cold and warm engines.
Procedure for jump-starting the engine using a weak battery.
Instructions on how to operate the machine's driving controls and select cutting height.
Advice and techniques for achieving optimal mowing results and patterns.
Procedure for safely stopping the engine, including idling and brake application.
A detailed schedule outlining daily, yearly, and hourly maintenance tasks.
Instructions for cleaning the machine after use, including precautions for high-pressure washers.
Steps for removing the engine cover and front cover for access.
Check for muffler integrity and secure fitting, noting heat warnings.
Procedure for checking and adjusting the steering wires to maintain proper steering alignment.
Steps for correctly adjusting the parking brake for reliable operation.
Procedure for adjusting the throttle cable to ensure proper engine response.
Instructions for replacing the fuel filter, including frequency and procedure.
Steps for replacing the air filter to maintain engine performance, with cleaning precautions.
Guidance on checking and cleaning the fuel pump's air filter.
Information on the ignition system, noting that only the spark plug requires maintenance.
Detailed steps for removing, checking, and replacing the spark plug.
Ensuring the safety system functions correctly by testing starting and stopping conditions.
Location and type of the main fuse and precautions for replacement.
Recommended tyre pressures for optimal performance and even cutting height.
Instructions for cleaning the engine's cooling air intake grille and duct.
Procedure to adjust the cutting unit's ground pressure for optimal cutting results.
Steps for adjusting the cutting unit's alignment to ensure proper parallelism.
Instructions on how to place the cutting unit in a vertical service position for cleaning and repair.
Guidance on checking the condition, sharpness, and attachment screws of the cutting blades.
Procedure for removing the mulching plug to change the cutting unit's function.
Procedure for checking the engine oil level using the dipstick.
Instructions for changing the engine oil at specified intervals.
Procedure for checking the oil level in the transmission's oil tank.
Guidance on lubricating the belt adjuster using molybdenum disulphide grease.
Information on lubricating joints, bearings, and control wires.
Steps for lubricating the front wheel bearings with molybdenum disulphide grease.
A table listing common problems and their corresponding solutions for troubleshooting.
Instructions for preparing the machine for long-term storage, especially winter storage.
Recommendations for performing service and maintenance during the low season.
Information about a protective cover for storage or transport.
Specifications for the machine's physical dimensions, weight, and tyre sizes.
Technical details about the engine, including brand, output, displacement, and oil type.
Specifications for the battery, fuse, spark plug, and electrode gap.
Data on sound power levels and cutting widths for different models.
Measurements of vibration levels on the steering wheel and seat.
Details about the transmission brand, oil type, and speed specifications.
Information on the types of cutting units available, such as JC 103 and JC 112.
Official declarations that the machine complies with European directives for machinery and EMC.
To Next Page