´®z+U,"¶6C¨
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the engine model measured to SAE
standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on the final machine will depend on the
operating speed, environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC. If the machine can be equipped with different
cutting decks, the noise emissions are stated in order starting from the cutting deck with the smallest cutting width.
Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical dispersion (standard de
viation) of 1.2 dB(A). If the
machine can be equipped with different cutting decks, the noise pressure levels are stated in order starting from the cutting deck with the smallest cutting width.
Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard de
viation) of 0.2 m/s
2
(steering wheel) and
0.8 m/s
2
(seat).
FR 2216 FA FR 2218FA 4X4
Dimensions
Length without cutting unit, mm/ft 2020/6,61 2020/6,61
Width without cutting unit, mm/ft 890/2,92 890/2,92
Height, mm/ft 1150/3,77 1150/3,77
Operating weight with cutting deck, kg/lb 271-274/597-604 292-295/644-650
Wheel base, mm/ft 887/2,9 887/2,9
Track width, front, mm/ft 712/2,34 712/2,34
Track width, rear, mm/ft 627/2,06 627/2,06
Tyre dimensions 16 x 7,5 x 8 16 x 7,5 x 8
Air pressure, rear - front, kPa / bar / PSI 60 (0,6/8,5) 60 (0,6/8,5)
Max. gradient 10
° 10°
Engine
Brand / Model Briggs & Stratton/31A6 Briggs & stratton/31G7
Nominal engine output, kW (see note 1) 9,8 9,7
Displacement, cm
3
/cu.in 502 502
Fuel, minimum octane grade lead-free 85 85
Tank volume, litres/USqt 10/10.6 10/10.6
Oil synthetic, class SJ-CF SAE 5W/30 or SAE 10W/30 SAE 5W/30 or SAE 10W/30
Oil tank capacity, litre/USqt 1,4/1,5 1,4/1,5
Starting Electric starter Electric starter
Max.motor speed, r/min 2900
± 100 2900 ± 100
Electrical system
Type 12 V, negative earthed 12 V, negative earthed
Battery 12 V, 24 Ah 12 V, 24 Ah
Main fuse Spade connector, 7.5 A Flat pin, 15 A.
Spark plug Champion QC12YC Platinum plug
Electrode gap, mm/inch 0,75/0,030 0,75/0,030
Noise emissions and cutting width
(see note 2)
Sound power level, measured dB(A) 98-98 98-97
Sound power level, guaranteed L
WA
dB(A) 99-98 99-98
Cutting width, cm/inch 103-112/41-44 103-112/41-44
Sound power level
(see note 3)
Sound pressure level at the operators ear, dB(A) 84-84 84-83
Vibration levels
(see note 4)
Vibration level on the steering wheel, m/s
2
2,5 2,5
Vibration level in the seat, m/s
2
0,7 0,7
Transmission
Brand Tuff Torq K46 K 574 KTM 10L
Oil, class SF-CC SAE 10W/40 SAE 10W/50 Synthetic
Forward speed, km/h. 0-9 0-9
Reverse speed, km/h 0-6 0-6
Cutting unit
Type JC 103 JC 103
JC 112 JC 112
To Next Page
Loading...
