Need help?Do you have a question about the Jonsered FR2216A and is the answer not in the manual?
General| Brand | Jonsered |
|---|---|
| Model | FR2216A |
| Category | Lawn Mower |
| Language | English |
Guidelines for safe operation and transportation on public roads, including securing the machine.
Instructions on how to tow the machine safely and avoid transmission damage.
Defines the proper applications for the machine and warns against misuse.
Information on dealer support, service, and warranty claims for Jonsered products.
Details on locating and identifying the machine's serial number for service and parts.
Comprehensive list of checks and procedures for pre-delivery inspection of the machine.
Specific maintenance tasks to be performed after the initial 5 hours of operation.
Explanation of various symbols used on the machine and within the operator's manual.
Essential safety rules for general use, warnings, and operator responsibilities.
Crucial advice on operating the machine safely on inclines and slopes.
Measures to prevent accidents involving children near the operating machine.
Safety guidelines for performing maintenance and transporting the machine.
Detailed diagram and list identifying all machine controls and their locations.
Instructions on how to apply and release the parking brake mechanism.
Explanation of the clutch pedal's role in disengaging the engine and stopping propulsion.
Details on the brake pedal's function on specific models and its relation to the parking brake.
How to use throttle and choke controls for engine speed and cold starting.
Specific instructions for operating the throttle control on the FR 2216A2 model.
Details on using the choke lever for cold starting on the FR 2216A2 model.
Explanation of the speed limiter function and its operation using pedals.
Overview of the cutting unit, including ejection and mulching capabilities.
Instructions for adjusting the cutting height using the dedicated lever.
Information on how to adjust the operator's seat for proper positioning.
Guidelines for safely filling the fuel tank with appropriate fuel types.
Instructions on using the release control to move the machine when the engine is off.
Essential checks and procedures to perform before starting the engine.
Step-by-step guide to starting the machine's engine.
Procedure for jump-starting the machine using another vehicle's battery.
Instructions on how to drive, control speed, and change gears or use pedals.
Advice for achieving optimal mowing results and maintaining the cutting unit.
Procedure for safely stopping the engine and disengaging the drive system.
A detailed schedule outlining daily, interval, and periodic maintenance tasks.
Instructions for cleaning the machine and removing protective hoods for access.
Guidance on checking the muffler for completeness and secure mounting.
Procedures for checking and adjusting the steering wires and brake systems.
Step-by-step instructions for replacing the air filter on different models.
Guidance on replacing the spark plug, checking ignition system, and fuses.
Procedures to verify the proper functioning of the machine's safety interlock systems.
Checks and adjustments for cooling air intake, ground pressure, and cutting unit parallelism.
Instructions for placing the cutting unit in a service position for easier access.
Guidance on inspecting the cutting blades for damage, sharpness, and securing.
Procedure for removing the mulching plug to switch the cutting unit function.
Instructions for checking engine oil level and performing oil changes.
Procedure for checking the oil level in the transmission system.
Guidance on lubricating various joints, bearings, and control wires.
Detailed steps for proper winter storage to protect the machine.
Advice on performing service during the off-season to ensure readiness.
Key physical dimensions, weight, and tyre specifications for the machine.
Details on engine brand, model, power, displacement, and fuel requirements.
Data on sound power levels and the cutting width of the machine.
Measurements of vibration levels on the steering wheel and seat.
Details regarding the transmission brand, oil type, gears, and speeds.
Information on cutting unit type, width, and height adjustments.
Formal declaration of compliance with European directives and standards.
To Next Page