Need help?Do you have a question about the Jonsered FR2311 M and is the answer not in the manual?
General| Brand | Jonsered |
|---|---|
| Model | FR2311 M |
| Category | Lawn Mower |
| Language | English |
Welcomes the customer and thanks them for choosing the product.
Advises on road traffic regulations and secure transport of the machine.
Provides instructions and warnings regarding towing the machine safely.
Defines the intended use and essential safety requirements for operating the mower.
Information on dealer support, spare parts, and the importance of a service history.
Details essential checks performed before the machine is delivered to the customer.
Specifies initial maintenance required after the first 8 hours of operation.
Explains the various symbols used throughout the manual and on the machine for safety and operation.
Covers user responsibility, insurance, and general safe operation practices.
Warns about electromagnetic fields, physical hazards, exhaust fumes, and required PPE.
Provides critical advice for safe operation on slopes and general driving.
Emphasizes preventing children from operating or being near the machine.
Outlines safety rules for performing maintenance, handling fuel, battery, and electrical hazards.
Covers general machine checks, modifications, ventilation, stopping, and transport safety.
Details on using trailers, belts, and wheel blocks for secure transportation of the machine.
Identifies and labels all main controls and components on the machine.
Introduces the Jonsered Frontrider models and their key features.
Describes the function and operation of clutch, brake, throttle, choke, and speed controls.
Explains the cutting deck and the lever for adjusting its height and position.
Details on using the cutting unit lift and height adjustment levers for mowing and transport.
Explains how to adjust the operator's seat for comfort and proper operation.
Covers fuel filling procedures and the release lever for moving the machine when off.
Outlines essential checks and preparations required before starting the engine.
Provides step-by-step instructions for safely starting the engine.
Instructions for starting with a weak battery or using jump leads.
Details on how to drive the FR 2312 MA and FR 2311 M models, including gear selection.
Advice on mowing techniques, grass conditions, and the mulching function.
Specific procedure for starting on inclines for the manual gearbox model.
Procedure for safely shutting down the engine after operation.
Presents a table detailing regular maintenance tasks and their recommended intervals.
Guidelines for cleaning the machine after use, including warnings on water usage.
Instructions on how to remove engine and front covers for access to components.
Describes how to check and adjust the steering wire tension for proper steering alignment.
Details on checking the brake's effectiveness and adjusting it for proper function.
Explains how to adjust the throttle cable for correct engine speed response.
Step-by-step guide for replacing the engine air filter to ensure optimal performance.
Covers replacement of the fuel filter and checking the fuel pump's air filter for optimal fuel delivery.
Explains the importance of correct tyre pressure for cutting performance and machine stability.
Procedure for replacing the spark plug to maintain engine ignition and performance.
Covers fuse replacement and testing the machine's safety interlock system.
Instructions for cleaning the engine's air intake grille for proper cooling and preventing damage.
How to put the cutting unit into a service position for easier cleaning and maintenance.
Step-by-step guide to detach the cutting deck from the machine for servicing.
Instructions on how to reassemble the cutting deck onto the machine.
Covers fitting drive belts, checking blade condition, and tightening attachment screws.
Procedure to remove the mulching plug for switching to rear ejection mode.
How to check and maintain the correct engine oil level for engine health.
Procedure for changing the engine oil, including recommended intervals and oil types.
Steps for lubricating the front wheel axle and bearings for smooth operation.
Covers general lubrication for joints, wires, and bearings using specific greases.
Lists common issues with the engine, starting, power, vibration, and mowing, with their causes and solutions.
Detailed steps for preparing the machine for long-term storage, including fuel and battery care.
Advice on seasonal servicing and how to order correct spare parts using machine details.
Provides detailed dimensions, weight, tyre size, and air pressure for both models.
Lists engine brand, output, displacement, starting system, battery, and spark plug specifications.
Reports on sound emissions and vibration measurements according to applicable standards.
Specifies transmission type, gears, speeds, and cutting unit dimensions and heights.
States compliance with European directives for machinery, EMC, and noise emissions.
To Next Page