English
–
5
KEY
T
O SYMBOLS
Symbols
These symbols are on the machine and in the instr
uctions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure y
ou understand
the instructions before using the machine.
Alw
ays wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
Re
verse
Neutr
al
F
ast
Slo
w
Stop the engine
.
Batter
y
Chok
e
Fuel
Oil le
vel
Cutting height
Bac
kwards
F
orwards
Ignition
Warning: rotating parts. Keep hands and feet
clear.
Clutch in
Clutch out
P
arking brake
Br
ake
Clutch
Noise emission to the en
vironment
according to the European Community’
s
Directive. The machine’s emission is
specified in chapter Technical data and on
label.
Rotar
y blades Keep hands and feet
aw
ay from under the hood when the
engine is running
Ne
ver drive across a slope
Ne
ver use the machine if persons,
especially children, or animals, are in the
vicinity
Ne
ver carry passengers on the machine or
equipment
Dr
ive very slowly if no cutting unit is fitted
The cutting dec
k must be fitted at full
speed.
Switch off the engine and tak
e off the ignition
cable bef
ore repairs or maintenance
To Next Page
Loading...
