Need help?Do you have a question about the Jonsered FR2216A2 and is the answer not in the manual?
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Engine Net Power RPM | 2900 rpm |
| Sound Power Level | 100 dB(A) |
| Engine Type | 4-stroke |
| Power Output | 4.5 hp |
Guidelines for operating the machine on public roads and transporting it.
Instructions for safely towing the machine, with precautions against transmission damage.
Defines the intended purpose of the machine and safe operating practices.
Information on dealer support, service, and warranty for Jonsered products.
Explains how to locate and identify the machine's serial number for parts ordering.
Details the steps performed during the machine's pre-delivery inspection.
Outlines the initial maintenance required after the first 5 hours of operation.
Explains the various symbols used on the machine and in the operator's manual.
Advice on checking insurance coverage for the Jonsered Rider.
Essential safety rules and user responsibilities for general operation.
Critical safety guidelines for operating the machine on inclined surfaces.
Precautions to ensure children's safety around the operating machine.
Safety procedures and warnings related to machine maintenance and repairs.
Safety instructions and important information for transporting the machine.
Identifies and describes the location of all controls on the machine.
Explains the operation and application of the parking brake system.
Describes the function of the clutch pedal for disengaging the engine and stopping propulsion.
Details the throttle and choke controls for engine speed and cold starting.
Explains how the brake pedal activates the disc brake on the gearbox.
Describes the throttle control operation for regulating engine speed on the FR 2216A2.
Explains the choke lever's function for cold starting the engine on the FR 2216A2.
Details how to use the lifting lever to set the cutting unit for transport or mowing.
Explains the speed limiter function using two pedals for forward and backward drive.
Describes the different types of cutting units and their functions, including Mulching.
Explains how to adjust the cutting height to different positions.
Information on adjusting the machine's seat for operator comfort and safety.
Instructions on safely refuelling the machine with unleaded petrol.
Describes the release control for moving the machine when the engine is shut off.
Pre-operation checks and adjustments before starting the engine.
Step-by-step guide to starting the machine's engine.
Procedures for jump-starting the machine if the battery is weak.
Instructions on how to operate and drive the machine.
Advice on achieving optimal mowing results and techniques.
Steps for safely stopping the machine's engine.
How to use the release lever to move the machine when the engine is off.
Specific instructions for starting the engine on slopes with a manual gearbox.
A detailed schedule for regular maintenance tasks based on hours or time.
Guidelines for cleaning the machine after use and precautions.
Instructions for removing various hoods for access to internal components.
How to check the condition and securing of the muffler.
Procedures for checking and adjusting the steering wire tension.
How to check the adjustment of the brake system.
Steps for adjusting the brake on FR 2211 R and FR 2211 M models.
Brake adjustment procedures for specific models.
How to adjust the throttle cable for proper engine response.
Procedures for checking and adjusting the choke wire on the FR 2216A2.
Instructions for replacing the air filter on specific models.
Detailed steps for replacing the air filter on the FR 2216A2 model.
Guide for replacing the fuel filter at specified intervals.
How to check and clean the air filter for the fuel pump.
Importance of correct tyre pressure and recommended values.
Instructions for checking and maintaining the battery acid level.
Information about the engine's electronic ignition system and spark plug maintenance.
Location and type of fuses used in the machine's electrical system.
How to verify the functionality of the machine's safety interlock systems.
Procedures for cleaning and ensuring the engine's cooling air intake is clear.
How to adjust the cutting unit's ground pressure for optimal cutting.
Steps to check the alignment and angle of the cutting unit.
Instructions for adjusting the cutting unit's parallelism for even cutting.
How to place the cutting unit in a service position for easier access.
Detailed steps for putting the cutting unit into its service position.
Importance of checking blade condition, sharpness, and tightness.
Steps to return the cutting unit from the service position to normal.
Instructions for removing the mulching plug to change cutting functions.
How to check the engine oil level before operation.
Procedures and schedule for changing the engine oil.
Steps for replacing the oil filter on the FR 2216A2 model.
How to check and fill the transmission oil level on specific models.
Instructions for lubricating the belt adjuster mechanism.
Steps for lubricating the front wheel bearings on specific models.
General guidance on lubricating joints and control wires.
Detailed instructions for preparing the machine for winter storage.
Mentions a cover for protection during storage or transport.
Recommendations for service during the low season and ordering parts.
Official declaration of the machine's compliance with European directives.
To Next Page