´®z+R£@¶6*¨
1)
As rated by the engine manufacturer
FR 2216A2
Dimensions
Length without cutting unit, mm/ft 2060/6.75
Length with cutting unit, mm/ft 2260/7.41
Width without cutting unit, mm/ft 880/2,89
Width with cutting unit, mm/ft 1230/4.04
Height, mm/ft 1090/3.58
Operating weight with cutting deck, kg/lb 296/652
Wheel base, mm/ft 855/2,8
Track width, front, mm/ft 715/2.35
Track width, rear, mm/ft 625/2,05
Tyre dimensions 16 x 7,5 x 8
Air pressure, rear - front, kPa / bar / PSI 60 (0,6/8,5)
Max. gradient 10°
Engine
Brand / Model Briigs & Stratton/ 3057770123E1
Power
1)
, hp 16
Displacement, cm
3
/cu.in 480
Fuel, minimum octane grade lead-free 85
Fuel tank capacity, litre 10
Oil synthetic, class SJ-CF SAE 5W/30 or SAE 10W/30
Oil tank capacity, litre/USqt 1,4/1,5
Starting Electric starter
Electrical system
Type 12 V, negative earthed
Battery 12 V, 24 Ah
Main fuse Flat pin, 15 A.
Spark plug
Electrode gap, mm/inch 0,75/0,030
Noise emissions and cutting width
Sound power level, measured dB(A) 98
Guaranteed noise level 98
Cutting width, mm/inch 1120/44 (Combi 112)
Vibration levels
Vibration level on the steering wheel, measured according to EN 836:1997 / A2:2001, m/s
2
2,5
Vibration level in the seat, measured according to EN 836/A2 and ISO 2631-1 0,5
Transmission
Brand K 574 KTM 10L
Oil, class SF-CC SAE 10W/40
Forward speed, km/h. 0-9
Reverse speed, km/h 0-6
Cutting unit
Type Combi-unit
Cutting width, mm/inch 1030/41 (Combi 103)
1120/44 (Combi 112)
Cutting height 40-90/1 9/16-3 9/16
Blade length, mm/inch 390/15 3/8 (Combi 103)
420/16 1/2 (Combi 112)
To Next Page
Loading...
