6
–
English
KEY
T
O SYMBOLS
Symbols
These symbols are on the machine and in the instr
uctions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine.
Alw
ays wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
Reverse
Neutral
Fast
Slow
Stop the engine.
Batter
y
Chok
e
Fuel
Oil le
vel
Cutting height
Backwards
Forwards
Ignition
Hydrostatic free
wheel
Clutch in
Clutch out
P
arking brake
Br
ake
Clutch
Noise emission to the en
vironment according
to the European Community’s Directive. The
machine’s emission is specified in chapter
Technical data and on label.
Rotar
y blades Keep hands and feet
away from under the hood when the
engine is running
Risk that the machine will tip over
Never drive across a slope
Never use the machine if persons,
especially children, or animals, are in the
vicinity
Ne
ver carry passengers on the machine or
equipment
Dr
ive very slowly if no cutting unit is fitted
To Next Page
Loading...
