Need help?Do you have a question about the Jonsered FR 2215 MA and is the answer not in the manual?
General| Brand | Jonsered |
|---|---|
| Model | FR 2215 MA |
| Category | Lawn Mower |
| Language | English |
Thanks for choosing Jonsered. Machine design, performance, and extending life through manual use.
Check road traffic regulations before driving on public roads. Secure machine when transporting on another vehicle.
Designed for mowing grass on open, level ground. Use only manufacturer-recommended accessories.
Jonsered offers support and service. Well-documented service history reduces costs and influences value.
Checklist for machine preparation before delivery to customer, covering battery, tires, adjustments, and checks.
First maintenance interval after 8 hours of operation. Includes engine and gearbox oil changes.
Explanation of symbols found on the machine and within the operator's manual for safety and operation.
Details on required insurance coverage for the Rider, including third party, fire, damage, theft, and liability.
Read and understand all instructions before operating. Safety precautions for safe operation and preventing injury.
Safe operation on slopes. Avoid steep slopes, sudden changes in direction, and driving over uneven ground.
Safety precautions regarding children near the operating machine. Keep children away from the work area.
General safety guidelines for performing maintenance tasks. Ensure engine is off and key is removed.
Guidelines for safely transporting the machine on a trailer or vehicle. Secure it firmly with tension belts and wheel blocks.
Diagram identifying and labeling all essential controls and components on the machine for user reference.
Congratulates the customer, introduces the machine's quality and features, and mentions engine types.
Describes the rear ejection cutting unit (FR 2213 RA) and the Combi-unit (FR 2213 MA, FR 2215 MA).
Explains how to use the lever to set the cutting unit in transport or mowing position, and stop blades.
Describes the stepless speed regulation using two pedals for forward and reverse movement.
Details how to adjust the cutting height to 7 different positions using the lever.
Information on adjusting the seat lengthways and tipping it forward for access or comfort.
Instructions for refueling with unleaded petrol, octane rating, recommended fuel, and safety precautions.
How to use the release control to move the machine when the engine is shut off.
Describes separate controls for front and rear axles on the 4x4 model to disengage drive.
Pre-start checks: air intake, safety instructions, maintenance schedule, and seat adjustment.
Step-by-step instructions for starting the engine, including clutch, parking brake, and throttle positions.
Procedure for jump-starting the machine using another vehicle's 12-volt battery.
Advice on achieving best mowing results: localize obstacles, use high cutting height, and avoid wet grass.
Instructions on how to properly stop the engine, including idling to cool down and using the parking brake.
List of maintenance tasks with intervals: daily, annually, and in hours for various components.
Instructions for cleaning the machine after use, emphasizing washing off grass before it dries.
Procedure for removing the engine cover and front cover to access parts for servicing.
Check the muffler for completeness and secure mounting. Warning about hot surfaces.
How to check and adjust steering wires that may become slack, affecting steering alignment.
Procedure to adjust the parking brake for specific models on a slight downhill slope.
Procedure to adjust the parking brake for the 4x4 model on a slope with axles disengaged.
How to adjust the throttle cable if engine response, speed, or smoke output is incorrect.
Step-by-step guide to replacing the air filter cartridge to maintain engine performance.
Procedure for replacing the fuel filter at specified intervals or if it becomes clogged.
How to check and clean the fuel pump's air filter for optimal engine operation.
Specifies correct tyre pressure for all wheels to ensure even cutting height and drive performance.
Guide to replacing the spark plug, including cleaning, gap measurement, and tightening procedures.
Location and type of the main fuse. How to identify and replace a blown fuse.
How to test the machine's safety system that prevents starting or driving under specific conditions.
Instructions on cleaning the engine's cooling air intake grille to prevent overheating and damage.
How to adjust cutting unit ground pressure for optimal cutting results on varied surfaces.
Procedure to check the cutting unit's alignment for optimal cutting results, ensuring a slight slant.
Steps to adjust the cutting unit's parallelism by modifying screw tension for proper alignment.
How to place the cutting unit in a vertical service position for easy cleaning, repairs, and servicing.
Importance of sharp, undamaged blades. Check attachment screw tightness and blade balance.
How to safely return the cutting unit from the service position to the normal operating position.
Procedure to remove the mulching plug to change the Combi unit to rear ejection mode.
How to check and top up the engine oil level using the dipstick, ensuring correct filling.
Procedure for changing the engine oil at specified intervals, including draining and refilling.
How to check the transmission oil level and fill if necessary with the correct type of oil.
Instructions on lubricating the belt adjuster using molybdenum disulphide grease.
General lubrication points for joints, bearings, steering, and control wires with specified lubricants.
Instructions for preparing and storing the machine during winter or extended idle periods to prevent damage.
Recommendations for performing service during the low season to ensure high function safety during peak season.
Information about a protective cover for the machine during storage or transport.
To Next Page
