Need help?Do you have a question about the Jonsered FR 2216 A 4X4 and is the answer not in the manual?
General| Brand | Jonsered |
|---|---|
| Model | FR 2216 A 4X4 |
| Category | Lawn Mower |
| Language | English |
Guidelines for safe operation and securing the machine during transport on public roads and other vehicles.
Instructions on how to tow the machine safely, warning about potential transmission damage.
Details the machine's design purpose for cutting grass and other tasks, emphasizing correct operation.
Information on dealer support, service, and warranty, encouraging the use of authorized dealers.
Guidance on locating and identifying the machine's serial numbers for engine and transmission.
A comprehensive checklist of tasks performed before delivery to ensure the machine is ready for use.
Specific maintenance actions required after the first 5 hours of machine operation.
Explanation of various symbols found on the machine and within the operator's manual.
Visual guide and steps detailing the correct procedure for starting the machine's engine.
Essential safety guidelines for operating the machine, including personal protective equipment and general use.
Advice on insuring the rider and emphasizing driver responsibility for accidents and dangers.
Covers essential practices like checking surroundings, stopping the engine, and avoiding foreign objects.
Detailed instructions and warnings regarding the risks and safe procedures for operating on slopes.
Critical warnings and procedures to ensure child safety in the operating area and prevent unauthorized use.
Safety measures to be taken before performing any maintenance or adjustments on the machine.
Guidelines and warnings for securely transporting the machine on vehicles or trailers, including road regulations.
Diagram and list identifying the location and function of all primary controls on the machine.
Introduction to the Jonsered Frontrider models, highlighting their design and features.
Explanation of the choke control's function for cold starting and enriching the fuel mixture.
Description of how the speed is controlled using the two-pedal hydrostatic transmission system.
Detailed steps on how to apply and release the parking brake for secure operation.
Information about the 3-blade Combi-unit, including mulching and rear ejection functions.
Instructions on using the lever to set the cutting unit for transport or mowing positions.
Details on how to adjust the seat for comfort and access, including tipping forward.
Guidelines for safely refuelling the machine with unleaded petrol, including warnings and fuel type recommendations.
Explanation of the release control's function for moving the machine when the engine is shut off.
Description of the clutch control for the rear axle, indicating engaged and disengaged states.
Description of the clutch control for the front axle, indicating engaged and disengaged states.
Essential checks and preparations before starting the engine, including safety and maintenance.
Step-by-step guide on how to correctly start the machine's engine.
Instructions and safety warnings for jump-starting the machine using another vehicle's battery.
Guidance on how to operate the machine for forward and reverse movement and speed control.
Advice on achieving optimal mowing results, including cutting height, speed, and lawn conditions.
Procedure for safely shutting down the machine's engine after operation.
Details on the release lever and clutch controls in the context of driving and stopping the machine.
A detailed list of maintenance tasks with intervals for daily, annual, and hour-based checks.
Instructions for cleaning the machine after use, including warnings about high-pressure washers.
Steps for accessing the engine and other components by removing the machine's hoods and covers.
Guidance on checking the muffler for completeness, security, and potential hazards.
Procedure for checking and adjusting the steering wires to maintain proper steering alignment.
Instructions for checking and adjusting the parking brake for reliable operation, especially on slopes.
Steps for adjusting the throttle cable if the engine response or maximum revs are not optimal.
Guidance on adjusting the choke wire to resolve issues with starting or engine smoke.
Procedure for replacing the fuel filter at recommended intervals or if clogged.
Instructions for replacing the air filter to maintain engine performance and prevent damage.
Procedure for checking and cleaning the air filter on the fuel pump to ensure proper fuel delivery.
Information on the electronic ignition system and maintenance requirements, focusing on the spark plug.
Step-by-step guide for removing, checking, and replacing the spark plug, including gap adjustment.
Procedures for verifying that the machine's safety systems prevent starting or operation under unsafe conditions.
Location and procedure for checking and replacing the main fuse in the electrical system.
Guidance on checking and maintaining correct tyre pressure for optimal cutting and performance.
Instructions for cleaning the engine's cooling air intake grille to prevent overheating.
Procedure for checking and adjusting the cutting unit's ground pressure for optimal cutting results.
Steps to check the parallelism of the cutting unit for even grass cutting height.
Detailed instructions for adjusting the cutting unit's parallelism to achieve a level cut.
Guide on how to place the cutting unit in the service position for easier cleaning and maintenance.
Specific steps for placing the Combi 94 cutting unit into the service position.
Instructions for returning the cutting unit from the service position to the normal operating position.
Steps for placing the Combi 103 and Combi 112 cutting units into the service position.
Procedure to restore the Combi 103/112 cutting unit from its service position back to normal operation.
Guidance on inspecting the cutting blades for damage, sharpness, and tightness.
Steps for removing the mulching plug to switch from mulching to rear ejection mowing.
Specific instructions for removing the mulching plug on model C94 for rear ejection.
Procedure for checking the engine oil level using the dipstick, with instructions on topping up.
Detailed instructions for changing the engine oil, including recommended intervals and oil types.
Procedure for replacing the engine oil filter, including lubrication of the new filter's seal.
Steps to check the transmission oil level and add oil if necessary.
Instructions for lubricating the belt adjuster using molybdenum disulphide grease.
Guidance on general lubrication of joints and bearings using appropriate grease.
Procedure for lubricating the front wheel bearings with molybdenum disulphide grease.
Detailed steps for preparing the machine for long-term storage, including fuel treatment and cleaning.
Information about a protective cover for the machine during storage or transport.
Advice on the best time to service the machine for optimal performance and longevity.
Formal declaration stating compliance with European directives for machinery, EMC, and noise emissions.
To Next Page
