27
HOTTAP
26
USER GUIDE
THE PUMP ISN’T WORKING AT ALL
• Check that the pump is properly connected to a 12V power
source or charged 12V battery.
THE PUMP MAKES A NOISE BUT DOES NOT PUMP WATER
• Ensure that the red plastic plugs have been removed from the
water inlet and outlet valves.
• Ensure that the inlet hose suction lter is clear. If clogged,
back-ush or disassemble and rinse individual parts.
THE FLOW OR PRESSURE SEEMS TO HAVE BEEN REDUCED
• Ensure that hoses are free from kinks and debris blocking
water ow.
• Ensure that the HOTTAP inlet lter is free from blockages.
• Ensure that your 12V battery holds a sucient charge to power
the pump.
• Ensure that all water hose connections are tight and that there
are no air leaks.
Troubleshooting :
O Grid Plumbing
To Next Page
Loading...
