Joovv Go User Manual

Once your Joovv Go is charged, you can use it
just about anywhere or anytime. Here’s how:
Before You Start
For optimal results and safe use, follow these 3
steps before starting a treatment with the
Joovv Go.
Read the manual: Please read these
instructions in full before using the Joovv Go.
STEP 1
Charge your Joovv Go: To charge your Joovv Go, carefully plug the Type-C end of the USB
cable into the Type-C connector on the device, as show in Figure A. Plug the other end of the
cable into the USB Power Adaptor. Allow up to (3) hours to fully charge your Joovv Go. Once
the device is fully charged, all three indicator lights will light up in a solid color.
STEP 2
Check for photosensitivity: To check if you are photosensitive, turn on your Joovv Go and
expose an area of your forearm 6 inches from the device, for 3 minutes. If you experience
redness or discomfort, you may be photosensitive. In this case, please consult with a doctor
or healthcare provider prior to using the Joovv Go.
STEP 3
TYPE-C INPUT
BATTERY
INDICATOR LIGHTS
FIG. A
USING YOUR JOOVV GO
2.1

Joovv Go Specifications

General

Brand	Joovv
Model	Go
Category	Medical Equipment
Language	English