7
Assembly and Usage
Unpacking the Bassinet
• Keep children away from bassinet while unpacking and assembling.
• Open the travel bag and remove the bassinet. The bassinet comes fully assembled.
• Push both legs outward. (1) Ensure the legs lock into place by gently jiggling the legs. The joints
should be rmly engaged.
• Thread the four straps at the bottom of the bassinet fabric through the corresponding plastic rings
on the legs and secure the Velcro®. (2)
• The mattress comes rst installed in bassinet mode (upper position).
• To install the mattress in bassinet mode after use in playpen mode, orient the mattress so that the
zipper pull tab matches with the zipper stop on the bassinet.
• Fasten the zipper all the way around the mattress. Ensure the zipper is completely fastened. (3)
• Thread the buckle on the zipper through the fabric loop on the mattress and secure. (4)
IWARNING: Before using the product in bassinet mode
(upper position), make sure that the zipper is completely closed all
the way around the perimeter of the product and also secured with
the buckle.
4
21
3
To Next Page
Loading...
