JOSAM laser AM
Measuring system
21
Degrees/minutes Degrees/ mm/m
Toe-in/toe-out
The following table shows comparison values.
Degrees in tenths and mm/m
Table mm/m compared with degrees and minutes
If the manufacturer gives tolerances in degrees
and minutes this table can be used for converting
to mm/m. For example: 10´ = 3 mm/m. 1° = 17.4
mm/m.
3’ 0.05° 0.9
6’ 0.10° 1.7
9’ 0.15° 2.6
12’ 0.20° 3.5
15’ 0.25° 4.4
18’ 0.30° 5.2
21’ 0.35° 6.1
24’ 0.40° 7.0
27’ 0.45° 7.8
30’ 0.50° 8.7
33’ 0.55° 9.6
36’ 0.60° 10.5
39’ 0.65° 11.3
42’ 0.70° 12.3
45’ 0.75° 13.1
48’ 0.80° 14.0
51’ 0.85° 14.8
54’ 0.90° 15.7
57’ 0.95° 16.6
60’ 1.00° 17.4
1°=60’
in tenths
To Next Page
Loading...
Need help?
General
