Jøtul F 370 Advance Series - Page 10

10
Fig. 7b
2. Attach the base to the burn chamber using the screws
(fi g. 5 A) provided.
Fig. 8
1
2
C
A
B
Rear outlet external
air supply
Rear outlet flue pipe
Rear outlet for the fl ue pipe
3. Drill holes in the removable cover (A) for the smoke outlet.
Then knock the cover out using a hammer.
Rear outlet for external air supply (optional extra)
4. If an outside air connection is to be fi tted to the rear outlet
(B) in the base, fi rst drill holes in the removable cover,
then knock the panel out using a hammer.NB: If using an
external air supply through the fl oor of the base, do
not knock the cover out.
Jøtul F 371 HT Advance - product with
base and High Top
See installation instructions
for cast iron door for base,
art. no. 10051081
See installation instructions
for High Top
art. no. 10050932
Jøtul F 377 Advance - product with base
and soapstone
See installation instructions for soapstone set, art. no. 10050929
ENGLISH