joule Cyclone - Technical Data for Indirect Models

Cyclone Direct / Indirect Installation Guide
17
Maximum mains water supply pressure 2.5MPa (25 bar)
0.3MPa (3 bar)
Expansion vessel pressure 1.0MPa (10 bar max)
Expansion relief valve setting 0.6MPa (6 bar)
Maximum design pressure 0.4MPa (4 bar)
T&P relief valve setting
Primary coil operating pressure (max) 0.6MPa (6 bar)
Immersion heater rating (a.c. supply only) single phase 3kW 50/60Hz ~
Storage weights (empty and full)
Indirect coil ratings
Pressure drop across the indirect coils
Technical Data
Indirect models in conformance with BS EN 12897:2016