EasyManua.ls Logo

joule Cyclone - Water Chemistry Levels and Cylinder Features; Water Chemistry Levels Affecting Warranty; Features Of The Unvented Cylinder

joule Cyclone
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cyclone Direct / Indirect Installation Guide
9
The Joule™ warranty of this water heater will not cover resultant faults on components including the
storage cylinder where water stored in the storage cylinder exceeds at any time any of the following
levels:
Maximum Permitted Levels
600 mg/litre
Total Hardness 200 mg/litre
300 mg/litre
Magnesium 10 mg/litre
20 mg/litre
Soldium 150 mg/litre
Iron 1 mg/litre
Maximum pH 9.5
Minimum pH 6.5
Total Dissolved Solids (TDS)
Some water analysis reports may state the conductivity of the water rather than the level of total dis -
The Joule™ warranty will not cover resultant faults to the storage cylinder if this water heater is
any time i.e. due to sediment build up.
Features Of The Unvented Cylinder
-
tion factor of zero.
with all the necessary safety and control devices needed to connect to cold water mains
drop which gives fantastic performance in all areas, with great improvements in areas with poor
water pressure.

Related product manuals