To Next Page
N
Nicholas LambertAug 14, 2025
How to fix a 'Battery Low' error on my Journey Scooter?
- SSamantha BanksAug 14, 2025
If your Journey Scooter displays a 'Battery Low' error, the primary solution is to recharge the batteries.
How to fix a 'Battery Low' error on my Journey Scooter?
If your Journey Scooter displays a 'Battery Low' error, the primary solution is to recharge the batteries.
What to do if my Journey Scooter shows a 'Low Battery Fault'?
If your Journey Scooter indicates a 'Low Battery Fault', begin by recharging the batteries. Additionally, inspect the battery itself along with all related connections and wiring for any signs of damage or looseness.
What to do if my Journey Scooter displays 'Current Limit Time-out or Controller too hot'?
If you encounter a 'Current Limit Time-out or Controller too hot' error on your Journey Scooter, it means the motor has been drawing excessive current for an extended period. To resolve this, turn the controller off, wait a few minutes, and then turn it back on. Also, inspect the motor and its associated connections and wiring.
Why does my Journey Scooter show a 'Drive Inhibit' error?
If your Journey Scooter shows a 'Drive Inhibit' error, it could be due to an active Stop function or a Charger Inhibit. Try releasing the Stop condition (e.g., ensure the seat is lowered). Also, disconnect the Battery Charger, and make sure the throttle is in neutral when turning the controller on. The Throttle may require re-calibration.
What causes a 'High Battery Fault' on a Journey Scooter?
A 'High Battery Fault' on your Journey Scooter may occur due to overcharging or when traveling downhill for an extended period. If descending a slope, reduce your speed to minimize the regenerative charging.
What should I do if my Journey Scooter shows a 'Park Brake Fault'?
If your Journey Scooter displays a 'Park Brake Fault', it indicates that either the park brake release switch is active or the park brake itself is faulty. Check the park brake and its associated connections and wiring. Ensure any associated switches are in their correct positions.
How do I troubleshoot a 'Speed Pot Fault' on my Journey Scooter?
If your Journey Scooter is showing a 'Speed Pot Fault', the throttle, speed limit pot, SRW, or their wiring may be faulty. Check the throttle, speed pot, and their connections and wiring.
What does 'Motor Voltage Fault' mean on my Journey Scooter?
If your Journey Scooter is showing a 'Motor Voltage Fault', the motor or its wiring may be faulty. Check the motor and its associated connections and wiring.
What to do if my Journey Scooter displays 'Other error'?
If your Journey Scooter displays an 'Other error', the controller may have an internal fault. Check all connections & wiring.
General| Motor Power | 350W |
|---|---|
| Charging Time | 4-5 hours |
| Foldable | Yes |
| Category | Scooter |
| Max Load | 100 kg |
| Tire Size | 8.5 inches |
| Brake Type | Disc Brake |
| Weight | 14 kg |
Safety aspects regarding modification, checks, weight capacity, and transport.
Instructions on how to engage and disengage the manual freewheel lever.
Covers pre-ride checks, mounting, and basic driving instructions.
Details coverage periods, exclusions, service, and replacement parts.
