Joy-it Arcade-GameStation - First Startup Preparation

Ausgabe 18.01.2017 Copyright by Joy-IT 37
3
Arcade-GameStaon
6. Assembly instrucons
Mount the Raspberry Pi in the case by mounng four screws [C] and washers [I] from
outside.
Fix the remaining cables with a cable e.
Step 9 | Preparaons for the rst start up
Connect the Gamestaon, as seen in chapter 2, with a HDMI-cable to a monitor or TV
and with the microUSB-power-supply to power.
An USB-keyboard and USB-mouse is needed for the rst startup.
Connect them to the Raspberry Pi.