Joy-it JDS6600 User Manual

JDS6600
Dual-Channel Signal Generator
1. GENERAL INFORMATION
Dear customer,
thank you for purchasing our product. In the following, we have listed what
you should consider during commissioning.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.

Joy-it JDS6600 Specifications

General

Brand	Joy-it
Model	JDS6600
Category	Inverter
Language	English

Summary

1. General Information

5. Measuring and Counting Functions

Coupling Settings

Configure AC or DC coupling for measurement functions.

Gate Time Settings

Set the measurement gate time from 0.01 to 10 seconds.

Measuring Mode Selection

Switch between measuring and counting modes.

Measurement Parameters

Define parameters like frequency, pulse width, and duty cycle.

6. Modulation Mode Operations

Sweep Function Setup

Configure starting and ending frequencies for signal sweeping.

Pulse Function Configuration

Set pulse wave width, period, offset, and amplitude.

Burst Function Setup

Define internal, external, or manual burst sequences.

7. System Configuration Options

Save and Load Settings

Save, load, and clear device configuration and data groups.

Brightness Configuration

Adjust display brightness levels.

Language Selection

Choose between English, German, and French languages.

Synchronization Settings

Synchronize channel parameters with the primary channel.

Arbitrary Wave Display Settings

Adjust the number of waveforms displayed on the interface.

8. PC Software Installation Guide

9. Using the JDS6600 Software

10. Further Information and Disposal

Product Symbol Meaning

Explains the meaning of the crossed-out bin symbol for electronics.

Appliance Return Options

Details on returning old appliances with new purchases or via mail.

Restitution Points

Information on where to return old appliances.

11. Support and Contact Information