2.SAFETY INSTRUCTIONS
MOUNTING THE MONITOR
Please make sure the monitor is placed on stable ground and no cables get
in the way, otherwise there is a danger of injuries. Please consider when pla-
cing the monitor on another device, this device must be able to withstand
the weight of the display, otherwise this can result to damages of the device.
SWITCH OFF IN DANGER
In case the monitor shows unusual happenings like smoke or smells, please
switch it o immediately and remove the power supply. Continued use may
lead to re or electric shock.
NEVER OPEN CASE
The monitor contains parts which are exposed to power. Opening the case
may lead to re or electric shock.
NEVER INSERT FOREIGN OBJECTS INTO MONITOR
You should never insert foreign objects or liquids into the monitor. Should
this happen, please switch it o and disconnect it from electricity. It can lead
to re or electric short circuits.
REMOVE CABLES BEFORE TRANSPORT
Please remove cables before transportation. Otherwise, this may lead to re
or short circuits.
DO NOT EXPOSE TO WATER
Any contact to water or even splash water can lead to re or electric shocks.
ORIGINAL POWER SUPPLY
While using a foreign power supply, it may lead to damages of the device or
re.
NEVER OPEN UP POWER SUPPLY UNIT
Opening the power supply unit may lead to electric shocks or re.
PLUGGING AND UNPLUGGING
You should always pull only on the plugs for plugging and unplugging, ot-
herwise the wiring can be damaged which may lead to a danger of re or
electric shocks.
DO NOT DAMAGE CABLES
Please be aware to not damage the cable in any way and to protect it against
exposures like pressure or tractive forces, because this may lead to re or
short circuits.
ENVIRONMENTAL CONDITIONS
You should not use the monitor among extreme temperatures, high humidi-
ty or very dusty air, because it may lead to re, short circuits or damages to
the device.